Abirami, R. and Sangeetha, S.P. (2020) Study on fiber reinforced concrete beam-column connection – A review. Materials Today: Proceedings, 33. pp. 415-419. ISSN 22147853

Abirami, R. and Sangeetha, Sreekumar Prabha and Divahar, R. (2025) Reinforced concrete beam-column joints through sisal fiber reinforced.An integrated experimental and analytical study of enhancing cyclic behavior. Structural Concrete. ISSN 17517648; 14644177

Aboobacker, P.A. and Ragunathan, L. and Thiyagarajan, T. and Sasi, A.C. and Kanniyan, K. and Yadav, R. and Ravikumar, S. (2024) Breaking boundaries in microbiology: customizable nanoparticles transforming microbial detection. Nanoscale, 16 (29). pp. 13802-13819. ISSN 20403364; 20403372

Anbalagan, R. and Hussain, M. Zahir and Jayabalakrishnan, D. and Naga Muruga, D.B. and Prabhahar, M. (2021) Vehicle to vehicle data transfer and communication using LI-FI technology. Materials Today: Proceedings, 45. pp. 5925-5933. ISSN 22147853

Antony Casmir Jayaseelan, G. and Anderson, A. and Poduva, Murali Krishnan and Sudheesh, P.V. and Roshith (2021) Synthesis and performances characteristics of biodiesel from animal fat. Materials Today: Proceedings, 45. pp. 6053-6056. ISSN 22147853

Antony Casmir Jayaseelan, G. and Anderson, A. and Prabhu, L. and Srinivasan, V. (2020) Impact of cerium oxide nanoadditives on the performance and emission characteristics of candlenut biodiesel. Materials Today: Proceedings, 33. pp. 890-894. ISSN 22147853

Antony Sakthi, S.A and Mani, C and Priyadarshini, K and Mary, A.N.G and Shinyjoy, E (2025) 3D MnNi₂S₄-MOF-67/rGO composite: a high-performance material for advanced supercapacitor applications. Applied Physics A: Materials Science and Processing, 131 (11). ISSN 09478396; 14320630

Ashokkumar, S and Antony Casmir Jayaseelan, G and Akash, A and Bharathi Raja, V and Abeesh, A (2020) Experimental Investigation of Composite Material in Boat Hull. IOP Conference Series: Materials Science and Engineering, 993 (1). 012029. ISSN 1757-8981

Ashokkumar, S and Thiagarajan, C and Jose, Hitheshu and Aswin Murali, P and Jacob, Akhil Reji (2020) Investigation of EDM machining parameters of different volume fraction of WC/Ni composites. IOP Conference Series: Materials Science and Engineering, 993 (1). 012015. ISSN 1757-8981

Ashokkumar, S and Thiyagarajan, C and Anvar, Misbah and Karthikayan, Kiran and Midhun, M (2020) Design and fabrication of automatic scrap collecting vehicle. IOP Conference Series: Materials Science and Engineering, 993 (1). 012038. ISSN 1757-8981

Ashokkumar, S. and Elanthiraiyan, A and Shagu, S. and Srinivasan, M. and Deepan, K. B. (2020) Comparison and Analysis of Custard Apple Seed Oil with Engine Lubricant (Bio Lubricant). IOP Conference Series: Materials Science and Engineering, 993 (1). 012008. ISSN 1757-8981

Ashokkumar, S. and Sathiyaraj, S. and Kumar, Nirmal and Muzammil, Shaik and Kumar, Dabbara Ravi (2020) Feasibility Study on Aluminium 7075 Metal Matrix Composite Using Graphene Oxide. IOP Conference Series: Materials Science and Engineering, 993 (1). 012009. ISSN 1757-8981

Ashokkumar, S. and Sundar Singh Sivam, S.P. and Balasubramanian, S. and Nanditta, R.V. (2021) Effects of process variables optimization on the quality of parts processed in high speed single point incremental sheet metal forming by ranking algorithm. Materials Today: Proceedings, 45. pp. 1707-1712. ISSN 22147853

Azeez, Shajahan and Shenbagaraman, R. (2025) Fourier transform infrared spectroscopy in characterization of bionanocomposites. Springer. pp. 209-227.

Babu, B. Selva and Kumar, D. Bubesh and Sathiyaraj, S. and senthilkumar, A. (2020) Experimental investigation and performance of diesel engine using biodiesel coriander seed oil. Materials Today: Proceedings, 33. pp. 1044-1048. ISSN 22147853

Baiseitov, D.A. and Tursynbek, S. and Sassykova, L.R. and Amir, Zh. and Orazbayev, A. and Tulepov, M.I. and Kudyarova, Zh. and Sendilvelan, S. and Prabhahar, M. and Prakash, S. (2020) Research of the combustion of gas-generating compositions with additives of carbon powders. Materials Today: Proceedings, 33. pp. 1216-1220. ISSN 22147853

Balachandar, B.K. and Logu, T. and Ramprasath, R. Hari and Sankarasubramanian, K. and Soundarrajan, P. and Sridharan, M. and Ramamurthi, K. and Sethuraman, K. (2020) Spray pyrolysis deposited CdO: Al films for trimethylamine sensing application. Materials Science in Semiconductor Processing, 105. p. 104753. ISSN 13698001

Balachandar, Ramalingam and Gurumoorthy, Paramasivam and Karmegam, Natchimuthu and Barabadi, Hamed and Subbaiya, Ramasamy and Anand, Krishnan and Boomi, Pandi and Saravanan, Muthupandian (2019) Plant-Mediated Synthesis, Characterization and Bactericidal Potential of Emerging Silver Nanoparticles Using Stem Extract of Phyllanthus pinnatus: A Recent Advance in Phytonanotechnology. Journal of Cluster Science, 30 (6). pp. 1481-1488. ISSN 1040-7278

Balachandar, Ramalingam and Krishnapriya, Venkatasan and Gurumoorthy, Paramasivam and Karmegam, Natchimuthu and Barabadi, Hamed and Subbaiya, Ramasamy and Anand, Krishnan and Boomi, Pandi and Saravanan, Muthupandian (2020) Correction to: Plant-Mediated Synthesis, Characterization and Bactericidal Potential of Emerging Silver Nanoparticles Using Stem Extract of Phyllanthus pinnatus: A Recent Advance in Phytonanotechnology. Journal of Cluster Science, 31 (4). p. 897. ISSN 1040-7278

Balachandar, Ramalingam and Navaneethan, Rajendran and Biruntha, Muniyandi and Ashok Kumar, Krishna Kumar and Govarthanan, Muthusamy and Karmegam, Natchimuthu (2022) Antibacterial activity of silver nanoparticles phytosynthesized from Glochidion candolleanum leaves. Materials Letters, 311. p. 131572. ISSN 0167577X

Balaji, S and Ganesamoorthy, R and Pandian, M.S and Karchiyappan, K (2025) Biocompatible smart material alloys for implantable devices. UNSPECIFIED.

Balakrishnan, A. and Jacob, M.M. and Dayanandan, N. and Chinthala, M. and Muthamilselvi, M. and Vo, D.N. and Appunni, S. and Gajendhran, A.S. (2023) Chitosan/metal organic frameworks for environmental, energy, and bio-medical applications: a review. Materials Advances, 4 (23). pp. 5920-5947. ISSN 26335409

Balasubramani, S. and Prabhavathi Neelakandan, Renjith and Kavisankar, L. and Rajavel, Rajkumar and Malarvel, Muthukumaran and Shankar, Achyut (2025) A Quantum-Enhanced Artificial Neural Network Model for Efficient Medical Image Compression. IEEE Access, 13. 31809 - 31828. ISSN 21693536

Banurekha, J. and Sangeetha, M. and Mahendran, C. and Muruganatham, S. V. (2024) Phytochemical Evaluation of Different Solvent Mediated Extracts and Brine Shrimp Lethality Bioassay of Psychotria octosulcata W. A. Talbot. International Journal of Nanoscience, 23 (02). ISSN 0219-581X

Behera, Anil K and Lakshmanan, C and Viswanath, R N and Poddar, C and Mathews, Tom (2020) Electrochemical studies on wafer-scale synthesized silicon nanowalls for supercapacitor application. Bulletin of Materials Science, 43 (1). ISSN 0250-4707

Behera, Anil K. and Viswanath, R.N. and Lakshmanan, C. and Madapu, K.K. and Kamruddin, M. and Mathews, T. (2019) Synthesis, microstructure and visible luminescence properties of vertically aligned lightly doped porous silicon nanowalls. Microporous and Mesoporous Materials, 273. pp. 99-106. ISSN 13871811

Behera, Anil K. and Viswanath, R.N. and Lakshmanan, C. and Mathews, Tom and Kamruddin, M. (2020) Synthesis of silicon nanowalls exhibiting excellent antireflectivity and near super-hydrophobicity. Nano-Structures & Nano-Objects, 21. p. 100424. ISSN 2352507X

Behera, Anil Kumar and Viswanath, Raghavan Nadar and Manovah David, T. and Prasad, Arun K. and Ajikumar, Puthuparampil K. and Mathews, Tom (2021) Hydrogen sensing behaviour of platinum and palladium functionalized silicon nanowalls. Applied Physics A, 127 (1). ISSN 0947-8396

Bharathi, M. L. and Rag, S. Adarsh and Chitra, L. and Ashick, R. Mohammed and Tripathi, Vikas and Kumar, Srinivasan Suresh and Al Obaid, Sami and Alfarraj, Saleh and Murugesan, Mohanraj and Raghavan, Ishwarya Komalnu and Velmurugan, Palanivel (2022) Investigation on Wear Characteristics of AZ91D/Nanoalumina Composites. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Bhaskar, K and Sassykova, L.R. and Prabhahar, M. and Percis, E. Sheeba and Nalini, A. and Jenish, T. and Jayarajan, J. and Jayabalakrishnan, D. and Sendilvelan, S. and Krishnamoorthi, Sangeetha (2021) Resistance Heated Catalytic Converter (RHCC) with copper oxide catalyst for reducing HC/CO emission from automobile. Materials Today: Proceedings, 45. pp. 5868-5872. ISSN 22147853

Bhaskar, K. and Jayabalakrishnan, D. and Vinoth Kumar, M. and Sendilvelan, S. and Prabhahar, M. (2021) Analysis on mechanical properties of wood plastic composite. Materials Today: Proceedings, 45. pp. 5886-5891. ISSN 22147853

Bhaskar, K. and Sassykova, L.R. and Prabhahar, M. and Kiani Deh Kiani, M. and Gomathi, K. and Sendilvelan, S. (2021) Oxides of nitrogen and soot trade-off characteristics of methyl esters in a hybrid mode compression ignition engine. Materials Today: Proceedings, 45. pp. 5847-5852. ISSN 22147853

Bhaskar, K. and Sassykova, L.R. and Prabhahar, M. and Shebha Percis, E. and Nalini, A. and Jenish, T. and Jayarajan, J. and Sendilvelan, S. (2021) Analysis of Cymbopogon Citratus, Pinus sylvestris and Syzygium cumini biodiesel feedstocks for its fatty acid composition. Materials Today: Proceedings, 45. pp. 5970-5977. ISSN 22147853

Bommi, R.M. and Vijay, J. and Murali Manohar, V. and Dinesh Kumar, J.P. and Sriram, D. (2021) Speech and gesture recognition interactive robot. Materials Today: Proceedings, 47. pp. 37-40. ISSN 22147853

Bubesh Kumar, D and Imthiyas, A and Midhu Dev, P and Valiyavalappil, Shaheen and Sreehari, P (2020) Experimental analysis of invitro biocompatibility of nano modified titanium alloys and stainless steel. IOP Conference Series: Materials Science and Engineering, 993 (1). 012005. ISSN 1757-8981

Bubesh Kumar, D. and Selva babu, B and Aravind Jerrin, K M and Joseph, N and Jiss, Abdul (2020) Review of Spark Plasma Sintering Process. IOP Conference Series: Materials Science and Engineering, 993 (1). 012004. ISSN 1757-8981

Bubesh Kumar, D. and Vijayakumar, K and Abhinesh and Martin, Alen V and George, Rahul (2020) Review of Biomechanical Characteristics of Illizarov Ring Fixators Using FEA. IOP Conference Series: Materials Science and Engineering, 993 (1). 012037. ISSN 1757-8981

Chakravarthy, S. Kalyan and Sudhakar, N. and Reddy, E. Srinivasa and Subramanian, D. Venkata and Shankar, P. (2019) Dimension Reduction and Storage Optimization Techniques for Distributed and Big Data Cluster Environment. In: UNSPECIFIED UNSPECIFIED, pp. 47-54.

Chinnakutti, Karthik Kumar and Panneerselvam, Vengatesh and Thankaraj Salammal, Shyju (2021) Impact of Cu addition on the optoelectronic properties of Zn3N2 thin films: n to p-type transitions. Materials Science and Engineering: B, 265. p. 115039. ISSN 09215107

Chinnakutti, Karthik Kumar and Shinyjoy, E. and Kamalan Kirubaharan, A.M. and Anandan, Sambandam (2024) Future prospects of pulsed laser techniques for advanced nanomaterials. Springer. pp. 273-308.

Chitra, L. and Gowri, N. Vasantha and Maheswari, M. and Uike, Dipesh and Medikondu, N. R. and Al-Ammar, Essam A. and Metwally, Ahmed Sayed Mohammed and Islam, Ataul and Diriba, Abdi and Ramesh Bapu, BR (2022) IoT-Based Solar Energy Measurement and Monitoring Model. International Journal of Photoenergy, 2022. pp. 1-8. ISSN 1110-662X

Chowdhury, Jayanta Nath (58844744100) and Bhanja, Santanu (55326932400) (2024) JUSTIFICATION OF STRONG COLUMN WEAK BEAM THEORY BY EVALUATION OF DUCTILITY OF COLUMN AND BEAM SECTIONS USING FIRST PRINCIPLES.

Devarajan, R. and Selvam, P. (2025) Design and Implementation of Solar Powered Induction Heater. In: Design and Implementation of Solar Powered Induction Heater.

Devi, Ch. and Vijayan, D.S. and Nagalingam, Ramesh and Arvindan, S. (2022) A review of the implementations of glass fiber in concrete technology. Materials Today: Proceedings, 62. pp. 2010-2015. ISSN 22147853

Dhanalakshmi, B. and Suresh, G. and G.a, Suganya Josephine and Padmadevi, B. (2025) Enhanced pseudocapacitive performance of wet-chemically synthesized novel CuO/BaO nanocomposite. Ionics. ISSN 09477047; 18620760

Dhanaraj, K. and Adhitiyan, T. and Gubendhiran, S. and Thenpandiyan, E. and Ilaiyaraja, P. and Sagadevan, Suresh and Suresh, G. (2024) Cardiospermum halicacabum leaf extract assisted Ag and Zn doped biocompatible nanohydroxyapatite photocatalyst for efficient dye degradation from wastewater. Materials Science and Engineering: B, 308. p. 117568. ISSN 09215107

Dharmalingam, K.N. and Nalini, A. and Jijina, G.O. and Sheeba Percis, E. and Jenish, T. and Jayarajan, J. and Sendilvelan, S. (2021) Investigation on microgrid control for grid tied PV battery system incorporating sustainable manufacturing technology. Materials Today: Proceedings, 45. pp. 5982-5986. ISSN 22147853

Dwibedi, Rajat Kumar and Jayaprakash, R. and Siva, T. and Gopinath, N.P. (2020) Hybrid electric vehicle using photovoltaic panel and chemical battery. Materials Today: Proceedings, 33. pp. 4713-4718. ISSN 22147853

Dwibedi, Rajat Kumar and Vanitha, V. and Sagar, R D and PhaniSai, P and GanjikuntaYeshwanth (2020) Automatic Gas Leakage Detection using IOT. IOP Conference Series: Materials Science and Engineering, 981 (4). 042085. ISSN 1757-8981

Epsy Devakirubai, I. and Ravi Kumar, S.M. and Allen Moses, S.E. and Gunaseelan, R. (2022) Probing optical (2nd and 3rd order), mechanical and thermal traits of L-arginine hydrochloride monohydrate (LAHCM) NLO crystal for optoelectronics device applications. Materials Today: Proceedings, 50. pp. 2802-2807. ISSN 22147853

Eswaramoorthy, Nandhakumar and Rajendran, Sathish and Arjun Kumar, B. and Nallusamy, Senthilkumar and Rengasamy, Marimuthu and Selvaraj, Yogapriya and Sangaraju, Sambasivam and Krishnan, Thiyagarajan and Kumaresan, G. and Rajaram, Kamatchi (2024) Influence of ZnO/MWCNTs based hybrid electrodes for boosting the performance of photovoltaic and supercapacitor devices. Materials Chemistry and Physics, 316. p. 129049. ISSN 02540584

Gali Anthoni, Suganya Josephine and Kuppan, Jayaprakash and Arumugam, Sivasamy and Govindan, Nirmala Devi and Raghavan Nadar, Viswanath (2022) rGO supported CeO2–ZnO ternary nanocomposites for enhanced photocatalytic activity under solar light irradiation for environmental remediation. Applied Physics A, 128 (5). ISSN 0947-8396

Ganesh, P. and Visagan, A. and Ethiraj, N. and Prabhahar, M. and Sendilvelan, S. (2021) Optimization of pyramid shaped single point incremental forming of AA5052 alloy sheet. Materials Today: Proceedings, 45. pp. 5892-5898. ISSN 22147853

Gayathri, A and Naveena Sajja, J and Vidhyashree Daswani, M and Prabhakaran, V and Ravindiran, M (2020) An Extensive Review of Shape Memory Polymers for Biomedical Applications. IOP Conference Series: Materials Science and Engineering, 993. 012161. ISSN 1757-899X

Gokul Varshan, M. and Joel Josephson, P. and Nayak, Bijaya Bijeta and Hariram, Venkatesan and Balachandar, K. (2023) History, Challenges, and Opportunities in Tissue Engineering. Scopus. pp. 148-167. ISSN 2327-5448

Gokulnath, V. and Vijayan, D.S. and Kathirvel, P. and Karthikraja, S. and Saravanan, B. (2020) Behaviour of retro fitted beams using natural fibers. Materials Today: Proceedings, 33. pp. 949-953. ISSN 22147853

Gopi Krishnan, R and Suganthan, R and Prabhakaran, V (2020) Preparation of Graphene based Hydroxyapatite by Freeze Drying Method. IOP Conference Series: Materials Science and Engineering, 993 (1). 012163. ISSN 1757-8981

Gopinath, R. and Narenderan, S. T. and Kumar, M. and Babu, B. (2019) Development and validation of a liquid chromatography-tandem mass spectrometric method for the determination of lenalidomide in human plasma and its application on bioequivalence studies. Journal of Analytical Science and Technology, 10 (1). ISSN 2093-3371

Govindarajan, Durai and Chinnakutti, Karthik Kumar (2022) Fundamentals, basic components and performance evaluation of energy storage and conversion devices. Scopus. pp. 51-74.

Govindarajan, Durai and Palaniyandy, Nithyadharseni and Chinnakutti, Karthik Kumar and Nguyen, Mai Thanh and Yonezawa, Tetsu and Qin, Jiaqian and Kheawhom, Soorathep (2022) Sputter-Deposited Binder-Free Nanopyramidal Cr/γ-Mo2N TFEs for High-Performance Supercapacitors. Nanoscale Research Letters, 17 (1). ISSN 1556-276X

Govindaraju, R. (55351615400) and Govindan, K. R. (57213279173) (2012) Impact of low cost embedded control on single cylinder diesel engine.

Gugulothu, Bhiksha and Sharma, Pankaj and Pragadish, N. and Vidyapriya, V. and Venkatesan, H. (2023) Electric Discharge Machining. Scopus. pp. 107-136. ISSN 2327-5448

Harikrishnan, A and Ramalingam, Balachandar and Nadeem, Ahmed and Ramachandran, Balajee and Veena, Vijay Kumar and Muthupandian, Saravanan (2024) Eco-friendly synthesis of zinc oxide nanoparticles (ZnOnps) from Piper betel leaf extract: spectral characterization and its application on plant growth parameters in maize, fenugreek and red gram. Materials Technology, 39 (1). ISSN 1066-7857

Harinarayanan, G. and Krishnan, V.K. and Natarajan, M.P. and Surender, V. and Gowthaman, J. (2022) Wear Behavior and Wear Worn Surface Analysis on Hardox Steel. Key Engineering Materials, 935. pp. 99-104. ISSN 1662-9795

Hema, L K and Amalna and Anil, Athira and Kanya (2020) Pregnant Women Health Monitoring System Using Embedded System. IOP Conference Series: Materials Science and Engineering, 993 (1). 012078. ISSN 1757-8981

Hema, L K and Velmurugan, S and Sunil, D N and Thariq Aziz, S and Thirunavkarasu, S (2020) IOT Based Real-Time Control and Monitoring System for Food Grain Procurement and Storage. IOP Conference Series: Materials Science and Engineering, 993 (1). 012079. ISSN 1757-8981

Hema, L.K. and Indumathi, R. and Prabhakaran and Kumari, Dipti (2021) Handheld tourist guidance system using GPS. Materials Today: Proceedings, 47. pp. 351-354. ISSN 22147853

Herald Lessly, S. and Lakshmana Kumar, S. and Raj Jawahar, R. and Prabhu, L. (2021) Durability properties of modified ultra-high performance concrete with varying cement content and curing regime. Materials Today: Proceedings, 45. pp. 6426-6432. ISSN 22147853

Imthiyas, A and Bubesh Kumar, D and Saravanan, M and Kalyanakumar, S (2020) Experimental Investigation of Glass Fibre Reinforced Metal mesh - PCB Hybrid Composite. IOP Conference Series: Materials Science and Engineering, 993 (1). 012034. ISSN 1757-8981

Imthiyas, A and Kalyana kumar, S and Sai krishnan, P P (2020) Heat transfer analysis of thermal barrier in high temperature fluid vessel. IOP Conference Series: Materials Science and Engineering, 993 (1). 012033. ISSN 1757-8981

Imthiyas, A and Prakash, S. and Vijay, N and Alwin Abraham, A and Ganesh Kumar, B (2020) Increasing the efficiency of solar panel by solar tracking system. IOP Conference Series: Materials Science and Engineering, 993 (1). 012124. ISSN 1757-8981

Imthiyas, A and Saravanan, M and Kumar, Praveen and Richard Meclar, F and Satyanarayan, D K (2020) Design of Muskmelon Seed Peeling machine. IOP Conference Series: Materials Science and Engineering, 993 (1). 012032. ISSN 1757-8981

J., Charles Rajesh Kumar and Kumar, D. Vinod and Majid, M.A. (2022) High-performance, energy-efficient, and memory-efficient FIR filter architecture utilizing 8x8 approximate multipliers for wireless sensor network in the Internet of Things. Memories - Materials, Devices, Circuits and Systems, 3. p. 100017. ISSN 27730646

Jayabalakrishnan, D. and Naga Muruga, D.B. and Bhaskar, K. and Pavan, P. and Balaji, K. and Rajakumar, P.S. and Priya, C. and Deepa, R.A.B. and Sendilvelan, S. and Prabhahar, M. (2021) Self-Healing materials–A review. Materials Today: Proceedings, 45. pp. 7195-7199. ISSN 22147853

Jayappa, Pradeep and Srinivasan, Santhosh and Vetrivel Murugan, K. and Thangavel, C. and Bala Theja, M. and Phanindra Raja Varma, G. and Marichamy, S. and Subbiah, Ram (2022) An overview on role of unconventional machining processes on different materials. Materials Today: Proceedings, 50. pp. 1341-1345. ISSN 22147853

Jayaraman, R. and Viknesh, M. and Girimurugan, R. (2023) Experimental investigations on mechanical and water absorption properties of epoxy resin matrix treated sugarcane and tamarind shell powder reinforced bio-Composites. Materials Today: Proceedings, 74. pp. 636-641. ISSN 22147853

Jensie Anita, S and Shaji, Joel Thomas and Adwaith, V and Akshay Mohan, S (2020) RETRACTED: Efficiency improvement using combined thermal heat exchanger for solar pv based water pump. IOP Conference Series: Materials Science and Engineering, 993 (1). 012075. ISSN 1757-8981

Jensie Anita, S. and Shakil Ahmed, Y. and Haris Prabhu, D. and Govind, S.L. (2020) Proposed modified solar based dc-dc quadratic boost converter for modern irrigation system. Materials Today: Proceedings, 33. pp. 4656-4662. ISSN 22147853

Jeyakanthan, M. and Shinyjoy, Elangomannan and Anbazhagan, Venkattappan (2025) Structural, optical and dielectric properties of Cr doped CoWO4 nanomaterial. Applied Physics A: Materials Science and Processing, 131 (1). ISSN 09478396; 14320630

Jeyakanthan, M. and Subramanian, Uma (2021) Enhanced DC conductivity and Seebeck coefficient of CoWO4/PbWO4 nanocomposites: role of interface. Applied Physics A, 127 (7). ISSN 0947-8396

Johnson Daniel, R. and Sangeetha, S.P. (2021) Experimental study on concrete using waste ceramic as partial replacement of aggregate. Materials Today: Proceedings, 45. pp. 6603-6608. ISSN 22147853

Joseph, R. Edwin and Kanya, N. and Bhaskar, K. and Xavier, J. Francis and Sendilvelan, S. and Prabhahar, M. and Kanimozhi, N. and Geetha, S. (2021) Analysis on productivity improvement, using lean manufacturing concept. Materials Today: Proceedings, 45. pp. 7176-7182. ISSN 22147853

Kajamuhideen, M. S. and Sethuraman, K. and Ramamurthi, K. (2018) Crystal growth, physical properties, and theoretical investigation on organic acentric single crystal towards efficient second-order NLO applications: Triphenylguanidine. Applied Physics A, 124 (11). ISSN 0947-8396

Kalpana, M. and Vaidevi, C. and Vijayan, D.S. and Benin, S.R. (2020) Benefits of metakaolin over microsilica in developing high performance concrete. Materials Today: Proceedings, 33. pp. 977-983. ISSN 22147853

Kalpana, M. and Vijayan, D.S. and Benin, S.R. (2020) Performance study about ductility behaviour in electronic waste concrete. Materials Today: Proceedings, 33. pp. 1015-1020. ISSN 22147853

Kalyanakumar, S and Prabhu, L and Saravanan, M and Imthiyas, A (2020) Experimental investigation of MRR, RA of 304 stainless steel using WEDM. IOP Conference Series: Materials Science and Engineering, 993 (1). 012035. ISSN 1757-8981

Kalyanakumar, S. and Chandy, Sam T. and Adil Muhammed, K.T. and Rohith, P.S. (2021) Multi-response optimization of machining parameters of turning operation with green environment in EN24T using grey relational analysis in Taguchi method. Materials Today: Proceedings, 45. pp. 6193-6197. ISSN 22147853

Kalyanakumar, S. and Munikumar, C. and Govind Nair, S. and Shaju, Sam (2021) Application of multi response optimization of drilling setting main process parameter using VIKOR approach. Materials Today: Proceedings, 45. pp. 6099-6102. ISSN 22147853

Kamatchi Hariharan, M. and Anderson, A. and Ravi Kumar, K. and Senthilkumar, A. (2021) Optimization of machining parameters in turning of LM6 high silicon aluminium alloy using aluminium titanium nitride and diamond like carbon coated carbide tool. Materials Today: Proceedings, 45. pp. 5853-5859. ISSN 22147853

Karthick, L. and K., Senthil Kumar and Vadivukarasi, L. and Hasan, Dler Salih and Nagarajan, L. and Aarthi, R. (2024) Advanced Electronic Healthcare Application Using Mechanical Renewable Energy for Long-Term Population. Springer. pp. 283-300. ISSN 2328-8205

Karthikeyan, C and Sreedevi, E and Kumar, Naveen and Vamsidhar, E and Rajesh Kumar, T and Vijendra Babu, D (2020) Cost Optimization in Neural Network using Whale Swarm Algorithm with Batched Gradient Descent Optimizer. IOP Conference Series: Materials Science and Engineering, 993 (1). 012047. ISSN 1757-8981

Karthikeyan, R and Fazil, M and Prabhakaran, V (2020) Preparation of Graphene Oxide Based Hydrogel for Diabetics Foot Ulcer. IOP Conference Series: Materials Science and Engineering, 993 (1). 012164. ISSN 1757-8981

Karthikeyan, S. and Nagasudhan, N. and Rogan, A. Nithin and Senthilkumar, A. and Leelaprasad, G. (2021) Transient numerical analysis on the melting characteristics of Paraffin and D-mannitol phase change materials for latent thermal energy storage. Materials Today: Proceedings, 45. pp. 6306-6313. ISSN 22147853

Kotaiah, Kolla and Periyasamy, P and Prabhahar, M (2020) Performance and Emission Characteristics of VCR Diesel Engine with Pre Heated Lemon Grass Biodiesel as Fuel. IOP Conference Series: Materials Science and Engineering, 925 (1). 012059. ISSN 1757-8981

Kotaiah, Kolla and Periyasamy, P. and Prabhahar, M. (2020) Performance and emission characteristics of small agricultural diesel engine using Lemongrass oil and its diesel blends. Materials Today: Proceedings, 33. pp. 658-662. ISSN 22147853

Krishnakumar, T. and Jayaprakash, R. and Sathya Raj, D. and Pinna, N. and Singh, V. N. and Phani, A. R. and Neri, G. (2011) Microwave-assisted synthesis, characterization and ammonia sensing properties of polymer-capped star-shaped zinc oxide nanostructures. Journal of Nanoparticle Research, 13 (8). pp. 3327-3334. ISSN 1388-0764

Krishnakumar, V. and Khan, F. Nawaz and Hathwar, Venkatesha R. and Nithya, P. and Suresh, S. (2010) 1,3,6-Trimethylpyrano[4,3- b ]pyrrol-4(1 H )-one. Acta Crystallographica Section E Structure Reports Online, 66 (2). o381-o381. ISSN 1600-5368

Krishnamoorthi, Sangeetha and Prabhahar, M. and Madhavan, V. and Pragathish, T. and Johnson, F. (2021) Effect of variation in injector nozzle holes on the performance of preheated Spirulina methyl ester used in VCR engine. Materials Today: Proceedings, 45. pp. 5840-5846. ISSN 22147853

Krishnamoorthi, Sangeetha and Prabhahar, M. and Prakash, S. and Prabhu, L. and Bhaskar, K. and Suku, Akhil V. and Shijindas, K. P. and Sooraj, S. L. and Haiter Lenin, A. and Jappes, J. T. Winowlin (2023) Investigation of Magnesium and Chromium Fillers FSW Dissimilar Joint of AA6063 and AA 5154. Advances in Materials Science and Engineering, 2023. pp. 1-13. ISSN 1687-8434

Krishnamoorthi, Sangeetha and Prabhu, L. and Kuriakose, Glen and Jose lewis, Dave and Harikrishnan, J. (2021) Air-cooling system based on phase change materials for a vehicle cabin. Materials Today: Proceedings, 45. pp. 5991-5996. ISSN 22147853

Krishnamoorthi, Sangeetha and Prabhu, L. and Shadan, MD and Raj, Harsh and Akram, Nadeem (2021) Design and analysis of electric Go-Kart. Materials Today: Proceedings, 45. pp. 5997-6005. ISSN 22147853

Krishnamorthi, Sangeetha and Prabhu, L and Dinesh, A and Joseph, Jopol Jeejo (2020) Contrived the Collateral Parking System. IOP Conference Series: Materials Science and Engineering, 993 (1). 012003. ISSN 1757-8981

Kumar, Dinesh and Rex, L.K. and Sethuraman, V.S. and Gokulnath, V. and Saravanan, B. (2020) High performance glass fiber reinforced concrete. Materials Today: Proceedings, 33. pp. 784-788. ISSN 22147853

Kumar, P. Madhan and Babujanarthanam, Ranganathan and Selvi, R. Tamil and Ganesamoorthy, Ramasamy and Sudan, S. Jesu Jaya and Kasthuri, K. and Ranganathan, Parameswari (2025) Spherical-shaped ZnO nanoparticles and their diverse surface morphological applications in various biological applications against ROS. Applied Physics A: Materials Science and Processing, 131 (5). ISSN 09478396; 14320630

Kumar, R.K. Sathish and Nagaprasad, N. and Krishnaraj, Ramaswamy and Velu, Rajkumar (2025) 3D-printed smart materials for automotive and aerospace applications. Elsevier. pp. 315-336.

Kumar Shukla, Kaustubh and Muthumanickam, T. (2022) A smart sensor using MEMS technology for artificial environmental monitoring. Materials Today: Proceedings, 66. pp. 3626-3633. ISSN 22147853

Kumaran, P and Lakshminarayanan, N and Martin, Alen V and George, Rahul and JoJo, Jones (2020) Design and analysis of shredder machine for e - waste recycling using CATIA. IOP Conference Series: Materials Science and Engineering, 993 (1). 012013. ISSN 1757-8981

Kumaran, P and Natarajan, S (2020) Effect of thermal barrier coating by nano particle on IC engine for various bio fuels - Review. IOP Conference Series: Materials Science and Engineering, 993 (1). 012014. ISSN 1757-8981

Kumaran, P. and Natarajan, S. and Shanmuga Raj, R. and Dhanaraj, S. and Rubesh Kumar, V. (2021) Performance and emissions on VCR diesel engine with turbocharger setup running using tomato seed oil. Materials Today: Proceedings, 45. pp. 6078-6082. ISSN 22147853

Kumaran, P. and Praveen, R. and Sajeev, Dhanush P and Ashwanth, C K and Jithu, G. S. (2020) RETRACTED: Performance analysis of ceramic hybrid lubricant. IOP Conference Series: Materials Science and Engineering, 993 (1). 012012. ISSN 1757-8981

Kuppusamy, Surendrababu and Muthuswamy, Prabhahar and Kumarasamy, Muthurajan and Subramanian, Sendilvelan (2023) Analysis of the Emissions and Performance of a Diesel Engine Using Pumpkin Seed Oil Methyl Ester with Different Injection Pressures. Fluid Dynamics & Materials Processing, 19 (4). pp. 1003-1014. ISSN 1555-2578

Lakshminarayanan, N and Senthil, J and Alvin raja, A and Jesudawson Silvanus, N and Satish (2020) Design and static analysis of polymer composite wind turbine blade. IOP Conference Series: Materials Science and Engineering, 993 (1). 012027. ISSN 1757-8981

Lakshminarayanan, N and Surendra babu, K and Amin, Siddanth and Sulficker, Ashif and Nassar, Muhammad Nazal Abdul (2020) Design optimization of robotic work cell layout in automotive industries. IOP Conference Series: Materials Science and Engineering, 993 (1). 012036. ISSN 1757-8981

Leela, Sundararaman and Subashini, Ashokkumar and Reji, Philip and Ramamurthi, Kandasami and Stoeckli-Evans, Helen (2020) Whole-molecule disorder of the Schiff base compound 4-chloro-N-(4-nitrobenzylidene)aniline: crystal structure and Hirshfeld surface analysis. Acta Crystallographica Section E Crystallographic Communications, 76 (3). pp. 417-422. ISSN 2056-9890

Leema Rose, A. and Elango, D. and Vijayan, D.S. and Jebasingh Daniel, J. (2021) Reliability analysis of corroded beams with FRP laminates. Materials Today: Proceedings, 45. pp. 5987-5990. ISSN 22147853

Lokesh Reddy, B.L. and Jatav, H.S. and Rajput, V.D. and Minkina, T. and Ranjan, A. and Harikrishnan, A. and Veena, V.K. and Chauhan, A. and Kumar, S. and Prakash, A. and Prasad, R. (2022) Nanomaterials Based Monitoring of Food- and Water-Borne Pathogens. Journal of Nanomaterials, 2022: 9543532. ISSN 16874110; 16874129

Mahesh, R and Surendrababu, K and Kumar, Sachin S and Anoop, C T and Nuhaiz, V P (2020) Emission characteristics of jackfruit peel oil with three hole nozzle. IOP Conference Series: Materials Science and Engineering, 993 (1). 012010. ISSN 1757-8981

Mahesh, R. and Muthurajan, Dr.K.G. and Senthilkumar, A. (2020) Experimental investigation of Jujube seed oil in VCR for different nozzles. Materials Today: Proceedings, 33. pp. 1198-1205. ISSN 22147853

Mahesh, R. and Muthurajan, K.G. and Surendrababu, K. and Senthilkumar, A. (2021) Investigation on performance and emission characteristics of jack fruit peel biodiesel in VCR using single hole nozzle. Materials Today: Proceedings, 45. pp. 6348-6355. ISSN 22147853

Manivannan, V. and Bhadusha, N. and Gunasekaran, T. and Rajapriya, R. and Uthrakumar, R. and Jeyakanthan, M. (2022) Growth and studies of Ba2+-doped ADP single crystal for optical and dielectric applications. Applied Physics A, 128 (5). ISSN 0947-8396

Mohan, E. (57192655268) and Puttamadappa, C. (8068896500) (2008) VLSI implementation of TCP/IP stack. European Journal of Scientific Research.

Mohan, Surendiran and Samiyappan, Rathakrishnan and Aadhikesavan, Harikirishnan (2023) Synthesis, Characterization, and Antimicrobial Activity of Sr-HAP Powders for Biomedical Applications. Scopus. pp. 230-267. ISSN 2327-5448

Mohana Priya, R and Hema, L. K. and Harishankari, G. and Pavithra, G. and Suva Lakshmi, T. (2020) IoT Webserver to Analyze the Quality of Air, Temperature, Humidity and noise in Our Environment. IOP Conference Series: Materials Science and Engineering, 993 (1). 012073. ISSN 1757-8981

Muthu, V. and Bhaskar, K. and Pavan, P. and Jayabalakrishnan, D. and Prabhahar, M. (2021) Experimental investigation on a two stroke SI engine to optimize fuel consumption through electronic ignition. Materials Today: Proceedings, 45. pp. 5965-5969. ISSN 22147853

Muthukumar, S and Thiruchitrambalam, M (2020) Performance augmentation of machining centers by improving the overall equipment effectiveness in subsystems. IOP Conference Series: Materials Science and Engineering, 993 (1). 012024. ISSN 1757-8981

Nagaraju, P. and Vasudevan, R. and Alsalme, A. and Alghamdi, A. and Arivanandhan, M. and Jayavel, R. (2020) Surfactant-Free Synthesis of Nb2O5 Nanoparticles Anchored Graphene Nanocomposites with Enhanced Electrochemical Performance for Supercapacitor Electrodes. Nanomaterials, 10 (1). p. 160. ISSN 2079-4991

Nageswari, C. Shobana and Pandey, Pramod K. and Sujitha, R. and Sujatha, M. S. and Senthilkumar, S. and Sujatha, S. (2025) Adaptive Solar Energy Storage with Deep Learning for Improved Grid Resilience. In: Adaptive Solar Energy Storage with Deep Learning for Improved Grid Resilience.

Nageswari, N. and Divahar, R. and Venkatesan, Narmatha (2025) Synergic effect of bio-enhanced cement with nano biomass silica and polycarboxylate ether: Enhancing strength and microstructure for sustainable construction. Materials Chemistry and Physics, 339. ISSN 02540584

Nalini, A and Sheeba Percis, E and Jijina, G O and Raja, M and Sendilvelan, S (2020) Supervisory Protection Scheme for a Wide Area 400KV Power Network. IOP Conference Series: Materials Science and Engineering, 993 (1). 012072. ISSN 1757-8981

Nallusamy, Senthilkumar and Selvaraj, Yogapriya and Ravi, Logesh and Karthikeyan, K. and Pandiaraj, Saravanan and Alodhayb, Abdullah N. and Alzahrani, Khalid E. and Eswaramoorthy, Nandhakumar and Annamalai, Selvalakshmi and Asaithambi, Sasikumar (2024) Optimizing symmetric supercapacitor performance through rational design of Zr/Cu/Fe Oxide-Modified Poly(vinyl alcohol) hybrid nanofibers. Materials Science and Engineering: B, 309. p. 117645. ISSN 09215107

Nanthakumar, S. and Madhavan, V. M. and Maheskumar, Pon and Jayaraman, R. and Muruganandhan, P. and Girimurugan, R. (2024) Optimisation of abrasive and corrosion behavior of AA2218 reinforced with Si3N4 / Al2O3 / ZnO2 hybrid composites. Springer. pp. 665-675.

Narmadha, T. and Gowrishankar, J. and Ramkumar, M. and Vengatesan, K. (2019) Cloud Data Center Based Dynamic Optimizing Replica Migration. Journal of Computational and Theoretical Nanoscience, 16 (2). pp. 576-579. ISSN 1546-1955

Naveen Kumar, K. and Vijayan, D.S. and Divahar, R. and Abirami, R. and Nivetha, C. (2020) An experimental investigation on light-weight concrete blocks using vermiculite. Materials Today: Proceedings, 22. pp. 987-991. ISSN 22147853

Naveenkumar, K. and Suriya, P.A. and Divahar, R. and Sangeetha, S.P. and Jayakumar, M. (2021) Experimental investigation flexural behavior of reinforced concrete beam with partial replacement of vermiculite. Materials Today: Proceedings, 46. pp. 5885-5888. ISSN 22147853

Nivetha, C. and Sangeetha, S.P. (2020) A literature survey on water quality of Indian water bodies. Materials Today: Proceedings, 33. pp. 412-414. ISSN 22147853

Nivetha, C. and Vijayan, D.S. and Ravishanker, R. and Ramkumar, S. and Azaguraja, P. (2020) Use of Pennywort for nitrogen and phosphate removal from sewage. Materials Today: Proceedings, 33. pp. 533-536. ISSN 22147853

P., Vengatesh and C., Karthik Kumar and T.S., Shyju and M., Paulraj (2022) Biomass‐derived Carbon as Electrode Materials for Batteries. Scopus. pp. 171-213.

Padmaavathy, P. A. and Panjagari, Kavitha and Peddinti, Neeraja and Lokeswar Reddy, D. V. and Venkatachalam, S. and Saravanan, M. (2025) The Future Role of Environmental Sustainability-Optimization using Artificial Intelligence Electric Vehicles. In: The Future Role of Environmental Sustainability-Optimization using Artificial Intelligence Electric Vehicles.

Panda, Kunal Kaushik and Anupriya, M and Naveen, C and Sandhiya, R (2020) An Eminent Design of Multipurpose (All-In-One Kneading Belt) for Lumbar Massage. IOP Conference Series: Materials Science and Engineering, 993 (1). 012165. ISSN 1757-8981

Parameswari, R. and Madhan Kumar, P. and Azhagu Pavithra, S. and Yogesh, T. and Iswarya, Janani and Ganesamoorthy, R. and Babujanarthanam, R. (2025) Materials for Microbial Fuel Cells. Science Talks. pp. 203-257. ISSN 27725693

Pareek, Piyush Kumar and Surendhar S, Prasath Alais and Prasad, Ram and Ramkumar, Govindaraj and Dixit, Ekta and Subbiah, R. and Salmen, Saleh H. and Almoallim, Hesham S. and Priya, S. S. and Jayadhas, S. Arockia and Raja, K. (2022) Predicting the Spread of Vessels in Initial Stage Cervical Cancer through Radiomics Strategy Based on Deep Learning Approach. Advances in Materials Science and Engineering, 2022. pp. 1-13. ISSN 1687-8434

Parthiban, A. and Lingam, K. Arun Prasath and Mangalaraj, S. and Muthukrishnan, P. and Surendiran, M. (2021) Structural Elucidation and Position Identification of Cu(II) ion in Hexaaquazinc(diaquabismalonto)zincate: Single Crystal EPR and Optical Studies. Journal of Cluster Science, 32 (5). pp. 1401-1409. ISSN 1040-7278

Parthiban, D. and Vijayan, D.S. (2020) Study on Stress-Strain effect of reinforced Metakaolin based GPC under compression. Materials Today: Proceedings, 22. pp. 822-828. ISSN 22147853

Parthiban, D. and Vijayan, D.S. and Sanjay Kumar, R. and Santhu, Anandhu P. and Abraham Cherian, Glenson and Ashiq, Mohammed (2020) Performance evaluation of Fly ash based GPC with partial replacement of RHA as a cementitious material. Materials Today: Proceedings, 33. pp. 550-558. ISSN 22147853

Parvathy, Subramanian and Manjula, Ganesan and Balachandar, Ramalingam and Subbaiya, Ramasamy (2022) Green synthesis and characterization of cerium oxide nanoparticles from Artabotrys hexapetalus leaf extract and its antibacterial and anticancer properties. Materials Letters, 314. p. 131811. ISSN 0167577X

Prabhahar, M. and Lakshminarayanan, N. and Muhammed, K.A. and Vishnu, M.K. and Varghese, Vijin (2021) Design of automobile car seat vibration analysis due to road excitation using CATIA. Materials Today: Proceedings, 45. pp. 6287-6291. ISSN 22147853

Prabhahar, M. and Prakash, S. and George, Iwin and Swaroop and Amith, K.K (2020) Optimization of performance and emission characteristics of bio diesel fuelled VCR engine using Taguchi approach. Materials Today: Proceedings, 33. pp. 859-867. ISSN 22147853

Prabhahar, M. and Prakash, S. and Saravana Kumar, M. and Sendilvelan, S. and Sreerag, M. V. and Akhil Vishnu, B. S. and Samad, Asif and Rani, B. Jansi and Allasi, Haiter Lenin and Haile, Adisu and Issac, Praveen Kumar and Ravindran, Balasubramani (2022) [Retracted] Copper Oxide Nanoparticles Incorporated in the Metal Mesh Used to Enhance the Heat Transfer Performance of the Catalytic Converter and to Reduce Emission. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Prabhakaran, V and Pavithra, S (2020) An Eminent Design for Wireless Power Transfer Using Rectenna Module Using Interleaved Boost Converter to Increase the Power Efficacy Delivered to the Biomedical Device. IOP Conference Series: Materials Science and Engineering, 993 (1). 012160. ISSN 1757-8981

Prabhu, L. and Krishnamoorthi, Sangeetha and Akbar, Muhammed Adil and Mubashir, P and Prashob, P (2020) Design and fabrication of ball burnishing tool for surface finish. IOP Conference Series: Materials Science and Engineering, 993 (1). 012001. ISSN 1757-8981

Prabhu, L. and Krishnamoorthi, Sangeetha and Gokul, P and Sushan, Nandhu and Hisham Harshed, P H and Jose, Aviss (2020) Aerodynamics analysis of the car using Solidworks flow simulation with rear spoiler using CFD. IOP Conference Series: Materials Science and Engineering, 993 (1). 012002. ISSN 1757-8981

Prabhu, L. and Satish Kumar, S. and Dinakaran, D. and Jawahar, Raj (2020) Improvement of chatter stability in boring operations with semi active magneto-rheological fluid damper. Materials Today: Proceedings, 33. pp. 420-427. ISSN 22147853

Prabhu, L. and Selvakumar, V. and Anderson, A. and Dhavamani, C. (2023) Influence of CNT fillers on the thermal, mechanical and shape memory properties of TPI shape memory polymer composites. Digest Journal of Nanomaterials and Biostructures, 18 (1). pp. 299-305. ISSN 18423582

Prakash, S. and Abdul Favas, C. S. and Ameeth Basha, I. and Venkatesh, R. and Prabhahar, M. and Durairaj, V. P. and Gomathi, K. and Lenin, Haiter and Adam, Khan M. (2022) Investigation of Mechanical and Tribological Characteristics of Medical Grade Ti6al4v Titanium Alloy in Addition with Corrosion Study for Wire EDM Process. Advances in Materials Science and Engineering, 2022. pp. 1-10. ISSN 1687-8434

Prakash, S. and Prabhahar, M. and Kurian, Alen Varghese and Girishanker, S and Mani, Kurian (2020) CFD analysis on heat transfer in a building wall using Phase Change Materials (PCM). IOP Conference Series: Materials Science and Engineering, 993. 012017. ISSN 1757-899X

Prakash, S. and Prabhahar, M. and Niyas, O.P. and Faris, Safavanul and Vyshnav, C. (2020) Thermal barrier coating on IC engine piston to improve efficiency using dual fuel. Materials Today: Proceedings, 33. pp. 919-924. ISSN 22147853

Prakash, S. and Prabhahar, M. and Thiagarajan, C. and Amith, A. and Mohanbabu, S. (2020) Performance Test of Tyre Pyrolysis Oil in Different Blended Ratio with Diesel. IOP Conference Series: Materials Science and Engineering, 993 (1). 012018. ISSN 1757-8981

Prakash, S. and krishnamoorthi, Sangeetha and Rai, Vivek and Kumar, Rohan and Gupta, Suraj (2020) Design of stable controller attachable Anti Roll System (ARS) for vehicles. IOP Conference Series: Materials Science and Engineering, 993 (1). 012031. ISSN 1757-8981

Prasath Alais Surendhar, S. and Ramkumar, Govindaraj and Prasad, Ram and Pareek, Piyush Kumar and Subbiah, R. and Alarfaj, Abdullah A. and Hirad, Abdurahman Hajinur and Priya, S. S. and Raju, Raja and Raja, K. (2022) Prediction of Escherichia coli Bacterial and Coliforms on Plants through Artificial Neural Network. Advances in Materials Science and Engineering, 2022. pp. 1-13. ISSN 1687-8434

Praveen, R and Prabhu, L and Premjith, P and Mohan, Adarsh. K. and Ajayraj (2020) Design experimental of RF controlled beach cleaner robotic vehicle. IOP Conference Series: Materials Science and Engineering, 993. 012030. ISSN 1757-899X

Priyadarshini, V. and Felixkala, T. and Depaa, R.A.B. and Hemamalinie, A. and Francis Xavier, J. and Surendra Babu, K. and Jeya Arthi, A.J. (2021) Experimental investigation on properties of coir pith and its influence as partial replacement of fine aggregate in concrete. Materials Today: Proceedings, 45. pp. 6903-6906. ISSN 22147853

Ragavendran, C. and Kamaraj, C. and Jothimani, K. and Priyadharsan, A. and Anand Kumar, D. and Natarajan, D. and Malafaia, Guilherme (2023) Eco-friendly approach for ZnO nanoparticles synthesis and evaluation of its possible antimicrobial, larvicidal and photocatalytic applications. Sustainable Materials and Technologies, 36. e00597. ISSN 22149937

Raghu, Y. and Venkatamuthukumar, J. and Nagaraju, P. and Allenmoses, S.E. (2020) Assessment of excess lifetime cancer risk of sand samples used as building materials in Tiruvannamalai district, Tamil Nadu, India by gamma ray spectrometry. Materials Today: Proceedings, 33. pp. 3654-3657. ISSN 22147853

Raghu, Y. and Venkatamuthukumar, J. and Ravisankar, R. (2020) Estimation of excess lifetime cancer risk in brick samples of Tiruvannamalai district Tamilnadu, India using gamma ray spectrometry. Materials Today: Proceedings, 33. pp. 3980-3983. ISSN 22147853

Raj, D. Sathya and Krishnakumar, T. and Jayaprakash, R. and Donato, N. and Latino, M. and Neri, G. (2010) Synthesis and Characterization of Cd(OH)<SUB>2</SUB> Nanowires Obtained by a Microwave-Assisted Chemical Route. Science of Advanced Materials, 2 (3). pp. 432-437. ISSN 19472935

Raja, M. Esakki and Sivalakshmi, Sivanathan and Balusamy, Thangavel and MUSTHAFA, B. and Sudharshan, M. and Goyal, Ashish and Bhowmik, Abhijit (2025) Experimental investigation on thermal performance of polyurethane foam mattresses with PCM. Discover Applied Sciences, 7 (5). ISSN 30049261

Raja, S. and Babu, R. Ramesh and Ramamurthi, K. (2018) Magnetic and photocatalytic properties of bismuth doped KNbO 3 microrods. Materials Research Bulletin, 105. pp. 349-359. ISSN 00255408

Raja, S. and Ramesh Babu, R. and Ramamurthi, K. and Sethuraman, K. (2018) Influence of Cr-doping on structural, morphological, optical, dielectric and magnetic properties of KNbO 3 ceramics. Materials Chemistry and Physics, 213. pp. 130-139. ISSN 02540584

Raja, S. and Vadivel, M. and Ramesh Babu, R. and Sathish Kumar, L. and Ramamurthi, K. (2018) Ferromagnetic and dielectric properties of lead free KNbO3-CoFe2O4 composites. Solid State Sciences, 85. pp. 60-69. ISSN 12932558

Rajendran, Chinnasamy and Chinta, Sandeep and Rajakumar, G. and Srinivasan, V. P. and Balachandar, K. and Arunkumar, S. (2025) Correlation between the Materials' Flow Behavior and the Strength of Friction Stir Welded AA2014 Aluminum Alloy Joints. Springer. 166 - 180. ISSN 2662-3161

Rajesh, Murugan and Venkatesan, Raja and Murali, Arun Prasad and Al-Asbahi, Bandar Ali and Hiremath, Vinayak S. and Sasikumar, R. and Dhilipkumar, Thulasidhas (2024) Evaluating the in-plane strength and vibrational behaviour of z-pinned fibre-reinforced composites. Multiscale and Multidisciplinary Modeling, Experiments and Design, 7 (4). pp. 4057-4066. ISSN 2520-8160

Ramalingam, Kothai and Balasubramanian, Arul and Muniappan, Saravanan and Rajagopal, Kalirajan and Andiappan, Nagappan (2025) Novel inhibitors of dengue virus methyltransferase: discovery by in vitro-driven virtual screening of fucoidan analogues, its synthesis, characterization, and potential in-vitro anti-dengue activity. Discover Applied Sciences, 7 (5). ISSN 30049261

Ramani, R and Vanitha, N. Suthanthira (2016) Computer Aided Detection of Tumors in Mammograms Using Optimized AdaBoost. Journal of Computational and Theoretical Nanoscience, 13 (8). pp. 4982-4987. ISSN 1546-1955

Ramesh, B. and Sathish Kumar, S. and Elsheikh, Ammar H. and Mayakannan, S. and Sivakumar, K. and Duraithilagar, S. (2022) Optimization and experimental analysis of drilling process parameters in radial drilling machine for glass fiber/nano granite particle reinforced epoxy composites. Materials Today: Proceedings, 62. pp. 835-840. ISSN 22147853

Ramesh, R. and Elangovan, N. and Lewise, K. Anton Savio and Anandan, R. and Sathish, S. and Shathragna, M. Dheeraj and Marichamy, S. and Subbiah, Ram (2022) Effect of fly ash on metal matrix composites – An overview. Materials Today: Proceedings, 50. pp. 1315-1318. ISSN 22147853

Ramesh, R. and Mohan, S. and Sivakumar, N.S. and Bruhathi, M. and Arun Kumar, S. and Ramarao, M. and Marichamy, S. and Subbiah, Ram (2022) Experimental investigation of lost foam casting process on aluminium. Materials Today: Proceedings, 50. pp. 1134-1137. ISSN 22147853

Ravikrishnan, Ganesh Bharathi and Venkatesan, S and Samuel, Bright (2020) Experimental examination on physicochemical properties of the Tamarind seed biodiesel in comparison with petroleum diesel fuel. IOP Conference Series: Materials Science and Engineering, 912 (4). 042050. ISSN 1757-8981

Ravindiran, M (2020) Higher Power Conversion Efficiency on Silicon based Heterojunction Device with FeZnO Dilute Magnetic Semiconductors. IOP Conference Series: Materials Science and Engineering, 993 (1). 012159. ISSN 1757-8981

Revathi, Palanisamy and Mohan, Janani S. and Balakrishnan, Thangavelu and Ramamurthi, Kandasamy and Thamotharan, Subbiah (2019) Crystal structure and Hirshfeld surface analysis of poly[[di-μ 3 -glycine-lithium] perchlorate]. Acta Crystallographica Section E Crystallographic Communications, 75 (2). pp. 134-138. ISSN 2056-9890

Sadhasivam, S. and Shanmugam, M. and Umamaheswaran, P.D. and Venkattappan, A. and Shanmugam, S. (2021) Zinc Oxide Nanoparticles: Green Synthesis and Biomedical Applications. Journal of Cluster Science, 32 (6). pp. 1441-1455. ISSN 15728862; 10407278

Sahaya Anselin Nisha, A. and Saravanan, M. and Sakthisudhan, K. and Vijendra Babu, D. (2021) Epoxy based textile 3 × 3 grid microstrip slots & breast tumor coverage detection by composites. Materials Today: Proceedings, 45. pp. 6623-6627. ISSN 22147853

Sampath, M. and Sankarasubramanian, K. and Archana, J. and Hayakawa, Y. and Ramamurthi, K. and Sethuraman, K. (2018) Structural, optical and photocatalytic properties of spray deposited Cu2ZnSnS4 thin films with various S/(Cu+Zn+Sn) ratio. Materials Science in Semiconductor Processing, 87. pp. 54-64. ISSN 13698001

Samuel, J. and Pravin, J. and Divahar, R. and Aravind Raj, P.S. and Joanna, P.S. (2021) Performance enhancement of built-up cold-formed steel beams with diagonal rebars in web. Materials Today: Proceedings, 45. pp. 5903-5910. ISSN 22147853

Sangeetha, M. and Banurekha, J. and Mahendran, C. and Kumar, M. and Venkateshwaralu, B. S. (2022) Optimization and Bio Genic Synthesis of Silver Nanoparticle from Psychotria octosulcata W.A Talbot and its in vitro Anti-Inflammatory Application. International Journal of Nanoscience, 21 (03). ISSN 0219-581X

Sangkana, Suthinee and Eawsakul, Komgrit and Ongtanasup, Tassanee and Boonhok, Rachasak and Mitsuwan, Watcharapong and Chimplee, Siriphorn and Paul, Alok K. and Saravanabhavan, Shanmuga Sundar and Mahboob, Tooba and Nawaz, Muhammad and Pereira, Maria L. and Wilairatana, Polrat and Wiart, Christophe and Nissapatorn, Veeranoot (2024) Preparation and evaluation of a niosomal delivery system containing G. mangostana extract and study of its anti-Acanthamoeba activity. Nanoscale Advances, 6 (5). pp. 1467-1479. ISSN 2516-0230

Sankaran, Ganesh and Venkatesan, S. and Prabhahar, M. (2020) Range Anxiety on electric vehicles in India -Impact on customer and factors influencing range Anxiety. Materials Today: Proceedings, 33. pp. 895-901. ISSN 22147853

Sankarganesh, R. and Shivakumar, R. and Chandrasekar, S. (2017) Study on Nano-Modified Mineral Oil Surface Discharge Partial Discharge Signal Characteristics for High Voltage Transformer Applications. Journal of Computational and Theoretical Nanoscience, 14 (4). pp. 1770-1777. ISSN 1546-1955

Saranya, D and Nanda kumar, R and Arun kumar, P and Sugumar, B J (2020) Tracking of any intruder on territory border using 360-degree radar and sensor. IOP Conference Series: Materials Science and Engineering, 993 (1). 012076. ISSN 1757-8981

Saranya, R. and Jansi, K. R. and Gowthami, M. and Priya, N. and Ganesh Babu, T. R. and Murugan, Subbiah (2025) Autonomous Voltage Stabilization in Hybrid Energy Grids with Reinforcement Learning. In: Autonomous Voltage Stabilization in Hybrid Energy Grids with Reinforcement Learning.

Saravana Kumar, M. and Prabhahar, M. and Prakash, S. and Senthil, J. and Thiagarajan, C. (2020) Experimental analysis of lemon grass biodiesel (LGB) with different exhaust gas recirculation. Materials Today: Proceedings, 33. pp. 876-880. ISSN 22147853

Saravanakumar, M. and Prakash, S. and Kumar, Nidhin S and Gautham, B V and Mathew, Bijoy (2020) Design and fabrication of seat belt-controlled hand brake system with ignition control. IOP Conference Series: Materials Science and Engineering, 993 (1). 012011. ISSN 1757-8981

Saravanan, B. and Vijayan, D.S. (2020) Status review on experimental investigation on replacement of red-mud in cementitious concrete. Materials Today: Proceedings, 33. pp. 593-598. ISSN 22147853

Saravanan, M and Krishnamoorthi, Sangeetha and Karthik, N and Kavin Kumar, S and Nikhil Krishnan, V (2020) Evaluation of mechanical strength of combined natural fiber reinforced polymer composites. IOP Conference Series: Materials Science and Engineering, 993 (1). 012021. ISSN 1757-8981

Saravanan, M and Prakash, S and Gnana Prakash, S and Akshaykrishna, M and Aswin Subhash, S (2020) Investigation of Mechanical Properties and Characterization of Hybrid Natural Fibre Polymer Matrix Composites. IOP Conference Series: Materials Science and Engineering, 993 (1). 012020. ISSN 1757-8981

Saravanan, M and Selvababu, B and Jayan, Anandhu and Anand, Angith and Raj, Aswin (2020) Arduino Based Voice Controlled Robot Vehicle. IOP Conference Series: Materials Science and Engineering, 993 (1). 012125. ISSN 1757-8981

Saravanan, M. and Kumar, A.M Vinoth and Kannan, V Nirmal and Thangaiah, I.S Stephan (2017) Optimization of process parameters during wire electrical discharge machining of Ti Gr 2 for improving corner accuracy. Materials Today: Proceedings, 4 (2). pp. 2105-2113. ISSN 22147853

Saravanan, M. and Kumar, D. Bubesh (2021) A review on navy ship parts by advanced composite material. Materials Today: Proceedings, 45. pp. 6072-6077. ISSN 22147853

Saravanan, M. and Vasanth, M. and Boopathi, Sampath and Sureshkumar, M. and Haribalaji, V. (2022) Optimization of Quench Polish Quench (QPQ) Coating Process Using Taguchi Method. Key Engineering Materials, 935. pp. 83-91. ISSN 1662-9795

Sassykova, L.R. and Aubakirov, Y.A. and Sh. Akhmetkaliyeva, M. and Sassykova, A.R. and Sendilvelan, S. and Prabhahar, M. and Prakash, S. and Tashmukhambetova, Zh.Kh. and Abildin, T.S. and Zhussupova, A.K. (2020) Heavy metals accumulation in plants of the dry-steppe zone of the East Kazakhstan region. Materials Today: Proceedings, 33. pp. 1187-1191. ISSN 22147853

Sathish Kumar, Ramakrishnan Kulasekaran and Sasikumar, Rathinasabapathy and Nagaprasad, Nagaraj and Ezhilvannan, Rathinam and Krishnaraj, Ramaswamy and Randhawa, Kawaljit Singh (2024) Investigation of Mechanical and Thermal Stabilities of Tamarind Seed- and Peanut Shell Powder-Reinforced Vinyl Ester Composite. Advances in Materials Science and Engineering, 2024. pp. 1-9. ISSN 1687-8434

Sathiyaraj, S. and Senthilkumar, A. and Muhammed Ameen, P. and Sundar, Rhitwik and Saseendran, Vishnu (2021) Experimental investigations on mechanical properties of Al-B4C metal matrix composites. Materials Today: Proceedings, 45. pp. 6372-6376. ISSN 22147853

Sathiyaraj, S. and Venkatesan, S. and Ashokkumar, S. and senthilkumar, A. (2020) Wire electrical discharge machining (WEDM) analysis into MRR and SR on copper alloy. Materials Today: Proceedings, 33. pp. 1079-1084. ISSN 22147853

Sayed Abhudhahir, Mohammed Harshulkhan and Kandasamy, Janaki (2015) Synthesis and characterization of Manganese doped Tungsten oxide by Microwave irradiation method. Materials Science in Semiconductor Processing, 40. pp. 695-700. ISSN 13698001

Sellamuthu, P. and Srinivas Reddy, P. and Ramesh, R. and Haritha Kiranmai, M. and Narayana Gupta, CH.LDS. and Daniel Das, A. and Subbiah, Ram (2023) Surface investigation on aluminium composite by additive manufacturing process. Materials Today: Proceedings, 72. pp. 2837-2840. ISSN 22147853

Selva Babu, B. and Sathiyaraj, S. and Ramesh, Anantha Krishnan P. and Afridi, B.A. and Kristo Varghese, K. (2021) Investigation of machining characteristics of aluminium 6061 by wire cut EDM process. Materials Today: Proceedings, 45. pp. 6247-6252. ISSN 22147853

Selva Babu, B. and Senthilkumar, A. and Maheshkumar, K. and Nidhin, M.A. and Dhinesh, R. (2021) Performance of plastic oil with different additives. Materials Today: Proceedings, 45. pp. 6176-6182. ISSN 22147853

Selvapriya, R. and Tamilchelvan, P. and Gopinath, M. and Supriya, S. (2023) Experimental investigation on flexural strength behaviour of reactive powder concrete. Materials Today: Proceedings. ISSN 22147853

Selvaraju, S. and Ramani, R. and Valarmathy, S. (2019) Flash Flood Measurement and Early Warning System to Remote Perilous Locations Based on Global System for Mobile and Embedded System. Journal of Computational and Theoretical Nanoscience, 16 (2). pp. 621-626. ISSN 1546-1955

Senthil, J and Prabhahar, M and Singh, Shashish and Poudel, Rajan and Vivek Kumar Achari, V (2020) Performance and emission characteristics of citronella oil as an alternative fuel. IOP Conference Series: Materials Science and Engineering, 993 (1). 012026. ISSN 1757-8981

Senthil, J. and Prabhahar, M. and Thiagarajan, C. and Prakash, S. and Lakshmanan, Ramalingam (2020) Studies on performance and process improvement of implementing novel vacuum process for new age castings. Materials Today: Proceedings, 33. pp. 813-819. ISSN 22147853

Senthil Kannan, K. and Gayathri Devi, S. and Nagarajan, Prithiviraj and Flora, G. and Ranadevan, R. (2020) Anti diabetic (AD) studies of picolinium maleate nano crystals. Materials Today: Proceedings, 33. pp. 3005-3007. ISSN 22147853

Senthil Kumar, T. and Balasubramanian, V. and Sanavullah, M.Y. (2007) Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy. Materials & Design, 28 (7). pp. 2080-2092. ISSN 02613069

Senthilkannan, K. and Velraj, Malarkodi and Alphonse, Arockia Jenecius and Nagarajan, Prithiviraj (2020) Anti diabetic (AD) studies of bis-glycine hydro bromide (45 nm) nano crystals. Materials Today: Proceedings, 33. pp. 3201-3202. ISSN 22147853

Senthilkumar, A. and Abhijith, E.P. and Jawhar, C. Ahammed Ansar and Jamshid (2021) Experimental investigation of Al2o3/Sio2 hybrid nanolubriant in R600a vapour compression refrigeration system. Materials Today: Proceedings, 45. pp. 5921-5924. ISSN 22147853

Senthilkumar, A. and Abhishek, P.V. and Adithyan, M. and Arjun, A. (2021) Experimental investigation of CuO/Sio2 hybrid nano-lubricant in R600a vapour compression refrigeration system. Materials Today: Proceedings, 45. pp. 6083-6086. ISSN 22147853

Senthilkumar, A. and Anderson, A. and Praveen, R. (2020) Prospective of nanolubricants and nano refrigerants on energy saving in vapour compression refrigeration system – A review. Materials Today: Proceedings, 33. pp. 886-889. ISSN 22147853

Senthilkumar, A. and Mohammed Sahaluddeen, P.A. and Nufais Noushad, Mohammed and Mohammed Musthafa, E.K. (2021) Experimental investigation of ZnO / Sio2 hybrid nano-lubricant in R600a vapour compression refrigeration system. Materials Today: Proceedings, 45. pp. 6087-6093. ISSN 22147853

Shakiyeva, T.V. and Sassykova, L.R. and Dzhatkambayeva, U.N. and Zhakirova, N.K. and Prabhahar, M. and Sendilvelan, S. and Ganesan, M. and Jaya Chitra, N. and Hari, Rajeswari (2021) Studying the regularities of oxidative catalytic cracking of vacuum distillates. Materials Today: Proceedings, 45. pp. 6028-6034. ISSN 22147853

Shanmugavel, K. and Lakshmana Kumar, S. and Saranya, S.N. and Prabhu, L. (2021) Effect of process parameters of (Cr3C2 + alumina) thermal spray coating on tribological control factors. Materials Today: Proceedings, 45. pp. 6400-6405. ISSN 22147853

Sharma, Vikas and Das, Tapan Kumar and Ilaiyaraja, P. and Sudakar, C. (2019) Oxygen non-stoichiometry in TiO2 and ZnO nano rods: Effect on the photovoltaic properties of dye and Sb2S3 sensitized solar cells. Solar Energy, 191. pp. 400-409. ISSN 0038092X

Sheeba Percis, E and Nalini, A and Jijina, G O and Jenish, T and Jayarajan, J and Chelladurai and Selvarani, N. and Sendilvelan, S (2020) Stability Analysis of Dedicated Green Energy Corridors and Enhancement of Renewable Energy Evacuation. IOP Conference Series: Materials Science and Engineering, 993 (1). 012071. ISSN 1757-8981

Shinyjoy, E. and Karthika, A. (2025) Advanced bioimplants nanomaterials for load-bearing applications: Case studies. Springer. pp. 383-416. ISSN 2662-3161

Shinyjoy, Elangomannan and Ramya, Subramanian and Jeyakanthan, M. (2025) Interface-driven enhanced dielectric constant of Dy�O�/CoWO� nanocomposite prepared by coprecipitation method. Applied Physics A: Materials Science and Processing, 131 (8). ISSN 09478396; 14320630

Shivakumar, N and Antony Casmir Jayaseelan, G and Parthiban and Ahmed and Akshay (2020) Ignition Timing and Fuel Injection Timing Control using Arduino and Control Drivers. IOP Conference Series: Materials Science and Engineering, 993 (1). 012019. ISSN 1757-8981

Shobana, R and Muthu Selvan, S and Aishwarya, A and Apoorva, N D and Christon, Gavin (2020) Bus route recognition for visually impaired people. IOP Conference Series: Materials Science and Engineering, 993 (1). 012048. ISSN 1757-8981

Shruthi, V. Lakshmi and Kalpana, M. and Vijayan, D.S. (2020) An experimental study on mechanical properties of bitumen added with industrial waste steel stag. Materials Today: Proceedings, 33. pp. 48-51. ISSN 22147853

Shruthi, V. Lakshmi and Kalpana, M. and Vijayan, D.S. (2020) An overview of experimental investigation on mechanical properties of bitumen added with industrial waste – Steel stag. Materials Today: Proceedings, 33. pp. 112-115. ISSN 22147853

Sinha, Shweta and Kaur, Amandeep and Sehgal, Rakesh (2024) Synthesis and characterization of silver nanoparticle conjugated-chalcones and their evaluation for antimalarial, cytotoxicity and haemolytic potential at in vitro level. Discover Applied Sciences, 6 (6). ISSN 3004-9261

Siva, M. and Sasikumar, T. and Raj, P.S. Aravind and Divahar, R. (2020) Ductility enhancement of reinforced concrete beam using Engineered Cementitious Composites in the tension zone. Materials Today: Proceedings, 33. pp. 189-195. ISSN 22147853

Sivasuriyan, Arvindan and Vijayan, D. S. and LeemaRose, A. and Revathy, J. and Gayathri Monicka, S. and Adithya, U. R. and Jebasingh Daniel, J. and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Development of Smart Sensing Technology Approaches in Structural Health Monitoring of Bridge Structures. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Sona, S. and Sangeetha, Sreekumar Prabha (2025) Eco-friendly alternative activators derived from industrial wastes for the sustainable production of two-part geopolymer concrete at low cost. Construction and Building Materials, 467. ISSN 09500618

Sreeskesh, R and Subin, S and Sadan, Nandhu and Abdullah, M and Prabhakaran, V (2020) IOT Based Real-time Medical Device Monitoring System. IOP Conference Series: Materials Science and Engineering, 993 (1). 012162. ISSN 1757-8981

Srinivasan, E. and Ravikumar, S. and Venkataramanan, S. and Purohit, Rituraj and Rajasekaran, R. (2019) Molecular mechanics and quantum chemical calculations unveil the combating effect of baicalein on human islet amyloid polypeptide aggregates. Molecular Simulation, 45 (18). pp. 1538-1548. ISSN 0892-7022

Srinivasan, Gopi and Manickam, Anushiya and Sivakumar, Sivasakthi and Murugan, Jeevadharani and Elangomannan, Shinyjoy and Surendiran, M. (2025) A comprehensive review: surface modification strategies to enhance corrosion resistance of zirconia-based biomaterials in implant applications. Journal of Materials Science: Materials in Engineering, 20 (1). ISSN 30048958

Subathra, P. and Sangeetha, S.P. (2021) Study on pellucid concrete incorporating optical fibers–a review. Materials Today: Proceedings, 45. pp. 6682-6686. ISSN 22147853

Subramanian, Balachandran and Kumaravel, Jeeva Jothi and Rajendran, Rajiev and Duraisamy, Rajamanickam and Rajaiah, Dhilip Kumar and Sandhiran, Nagarani and Govindasamy, Rajakumar and Pandiaraj, Saravanan and Rahaman, Mostafizur and Chang, Jih-Hsing (2024) Hydrothermal fabrication of two-dimensional indium oxide nanosheets for high-performance supercapacitors. Materials Letters, 358. p. 135835. ISSN 0167577X

Suganya Josephine, G A and Jayaprakash, K and Meenakshi, G and Sivasamy, A and Nirmala Devi, G and Viswanath, R N (2021) Photocatalytically active ZnO flaky nanoflowers for environmental remediation under solar light irradiation: effect of morphology on photocatalytic activity. Bulletin of Materials Science, 44 (4). ISSN 0250-4707

Suganya Josephine, G A and Jayaprakash, K and Sivasamy, A (2022) Flower-shaped ZnO–CeO2 nanorectangulates: an efficient photocatalyst for degradation of endocrine disruptor 2,4-dichlorophenoxy acetic acid under visible light. Bulletin of Materials Science, 45 (3). ISSN 0973-7669

Suganya Josephine, G.A. and Prathap Kumar, M. and Sivasamy, A. (2021) Comparative studies on the effect of photocatalytic degradation of azo and non-azo dyes by core-shell nanomaterial. Materials Today: Proceedings, 47. pp. 1873-1877. ISSN 22147853

Surendrababu, K and Mahesh, R and Chiranchan Sivoh, P and Aksha, D and Akhil, A (2020) Emission characteristics of hibiscus oil with three hole nozzle. IOP Conference Series: Materials Science and Engineering, 993 (1). 012028. ISSN 1757-8981

Surendrababu, K. and Muthurajan, K. G. and Prabhahar, M. and Prakash, S. and Saravana Kumar, M. and Jayakumar, Mani and Chelladurai, Samson Jerold Samuel (2022) Performance, Emission, and Study of DI Diesel Engine Running on Pumpkin Seed Oil Methyl Ester with the Effect of Copper Oxide Nanoparticles as an Additive. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Suriya, P.A. and Sangeetha, S.P. and Abirami, R. and Subathra, P. (2021) Stabilization of red soil using polypropylene. Materials Today: Proceedings, 46. pp. 5881-5884. ISSN 22147853

Tamilselvan, Palsami and Sassykova, Larissa and Prabhahar, M. and Bhaskar, Kathirvelu and Kannayiram, Gomathi and Subramanian, Sendilvelan and Prakash, S. (2020) Influence of saturated fatty acid material composition in biodiesel on its performance in internal combustion engines. Materials Today: Proceedings, 33. pp. 1181-1186. ISSN 22147853

Thamaraikannan, Thangavel and Karthikeyan, P. and Sasieekhumar, A. R. and Rathinavelu, Arumugam and Poovarasan, Madheswaran and Saravanakumar, Rathinavel and Srinivasan, P. and Rajavel, Rangappan (2025) Electrochemical analysis of g-C3N4-ferulic acid composite on the glassy carbon electrode surface and its electrocatalytic activity of dopamine oxidation and sensing. Applied Physics A: Materials Science and Processing, 131 (8). ISSN 09478396; 14320630

Thenpandiyan, E. and Ramasamy, Venkidasamy and Suresh, G. and Sathishpriya, T. (2025) Role of major rare earth (Y3+, La3+, and Gd3+) ions on enhancing supercapacitor performance of CaCO3 nanocomposites. Ionics. ISSN 09477047; 18620760

Thenpandiyan, E. and Ramasamy, Venkidasamy and Suresh, G. and Senthil, S. and Sathishpriya, T. and Perumal, Ilaiyaraja (2025) A naturally derived Sm3+-doped CaCO3 photocatalyst for the degradation of major organic dyes from wastewater. Ionics, 31 (5). 4669 - 4685. ISSN 09477047; 18620760

Thiagarajan, C and Lakshminarayanan, N and Anand, Abhay and Nikhil Santhosh, M. and Anderson, Naveen J (2020) Investigation and Analysis of Properties of Magnesium Alloy for Suitability to Electric Vehicle Components. IOP Conference Series: Materials Science and Engineering, 993 (1). 012007. ISSN 1757-8981

Thiagarajan, C and Mahesh, R and Viviyan, Joseph and Ashok, Asrith and Gokul, M (2020) Emission characteristics of spirulina biodiesel with single hole nozzle. IOP Conference Series: Materials Science and Engineering, 993 (1). 012006. ISSN 1757-8981

Thiagarajan, C. and Prabhahar, M. and Prakash, S. and Senthil, J. and Kumar, M. Saravana (2020) Heat transfer analysis and optimization of engine cylinder liner using different materials. Materials Today: Proceedings, 33. pp. 778-783. ISSN 22147853

Thiruchitrambalam, M. and Bubesh Kumar, D. and Shanmugam, D. and Jawaid, M. (2020) A review on PEEK composites – Manufacturing methods, properties and applications. Materials Today: Proceedings, 33. pp. 1085-1092. ISSN 22147853

Thiruchitrambalam, M. and Suresh, A.G. and Shanmugam, D. and Prabhahar, M. (2021) Dynamic mechanical behavior and Fractography of Lyocell fabric - polyester composite. Materials Today: Proceedings, 45. pp. 6094-6098. ISSN 22147853

Thiyagarajan, Purushotham and Padmapriya, A. and Shanmugharaj, A. M. and Alagesan, T. (2025) DFT theoretical and experimental investigation of gelatin-loaded niobium-doped calcium apatite ceramics to elucidate its structural and electronic characteristics. Next Materials, 7. ISSN 29498228

Thiyagarajan, Purushotham and Padmapriya, Arumugam and Shanmugharaj, Andikkadu Masilamani and Kalaivani, Raman and Alagesan, Thangavel (2024) Electrospun Carbon Nanofiber‐Based Nanomaterials for Efficient Li‐Ion Batteries: Current Status and Future Directions. Springer. pp. 225-269.

Tholkapiyan, M. and Mohan, A. and Vijayan., D. S (2020) A survey of recent studieson chlorophyll variation in Indian coastal waters. IOP Conference Series: Materials Science and Engineering, 993. 012041. ISSN 1757-899X

Vaidevi, C. and Kala, T. Felix and Kalaiyarrasi, A.R.R. (2020) Mechanical and durability properties of self-compacting concrete with marble fine aggregate. Materials Today: Proceedings, 22. pp. 829-835. ISSN 22147853

Valarmathy, S. and Ramani, R. (2019) Evaluating the Efficiency of Radial Basis Function Classifier with Different Feature Selection for Identifying Dementia. Journal of Computational and Theoretical Nanoscience, 16 (2). pp. 627-632. ISSN 1546-1955

Venkataramanan, A.R. and Subramaniyan, Madheswaran and Kumar, S. Lakshamana and Jawahar, R. Raj and Prabhu, L. (2021) Application of CCD in RSM to obtain optimize treatment of tribological characteristics of WC-10Co-4Cr nanoceramic thermal spray coating. Materials Today: Proceedings, 45. pp. 6160-6170. ISSN 22147853

Venkatesan, Govindarajan and Jayakumar, Mani and Nemera, Abdi and Balachandar, Ramalingam (2024) Natural Fiber-Reinforced Polymer Composite Manufacturing Processes. Springer. pp. 1480-1493.

Venkatesan, S. and Rajamani, G. P. and Balasubramanian, V. and Rajakumar, S. (2015) Effect of Tool Rotational Speed on Tensile and Microstructural Behaviour of Friction Stir Welded AZ31B Magnesium Alloy Joints. Journal of Advanced Microscopy Research, 10 (4). pp. 277-283. ISSN 21567573

Venkatesh, A and Shinyjoy, E and Maheswaran, P and Jeyakanthan, M (2025) Eco-friendly synthesis of Azo-Schiff base metal complexes: evaluation of electrochemical behavior and biological activities. Applied Physics A: Materials Science and Processing, 131 (141). ISSN 09478396; 14320630

Vijayakumar, K and Bubesh Kumar, D. and Shivakumar, N (2020) Analysis of Magnetic Levitated Savonius Wind Turbine. IOP Conference Series: Materials Science and Engineering, 993 (1). 012039. ISSN 1757-8981

Vijayakumar, K and Prabhu, L and Subin, B S and Satheen, Sabari and Vaishnav, K (2020) Development of Hybrid Aluminium Metal Matrix Composites for Marine Applications. IOP Conference Series: Materials Science and Engineering, 993 (1). 012016. ISSN 1757-8981

Vijayakumar, K.R. and Jayaseelan, J. and Ethiraj, N. and Prabhahar, M. and Bhaskar, K. and Jayabalakrishnan, D. and Sendilvelan, S. and Krishnamoorthi, Sangeetha (2021) Investigation on aluminium/mild steel plates bonded polyurethane sheets to control vibration. Materials Today: Proceedings, 45. pp. 5860-5867. ISSN 22147853

Vijayakumar, Vinodh and Sangeetha, S.P. (2021) Urban form as a critical factor in the Quality of Life indicators – A review. Materials Today: Proceedings, 37. pp. 877-879. ISSN 22147853

Vijayan, D S and Arvindan, S. and Parthiban, D. and Saravanan, B. and Kalpana, M (2020) Natural aggregates used for Light weight concrete – A Review. IOP Conference Series: Materials Science and Engineering, 993 (1). 012042. ISSN 1757-8981

Vijayan, D. S. and Mohan, A. and Jebasingh Daniel, J. and Gokulnath, V. and Saravanan, B. and Kumar, P. Dinesh and M, Ravichandran (2021) Experimental Investigation on the Ecofriendly External Wrapping of Glass Fiber Reinforced Polymer in Concrete Columns. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Vijayan, D.S. and Arvindan, S. and Parthiban, D. and Kumar, R. Sanjay and Saravanan, B. and Robert, Yumnam (2020) An experimental study on mechanical and durable properties of self-curing concrete by adding admixture. Materials Today: Proceedings, 33. pp. 496-501. ISSN 22147853

Vijayan, D.S. and Dineshkumar and Arvindan, S. and Shreelakshmi Janarthanan, Thattil (2020) Evaluation of ferrock: A greener substitute to cement. Materials Today: Proceedings, 22. pp. 781-787. ISSN 22147853

Vijayan, D.S. and Monisha, S. and Suneesh, S. and Vishak, M. and Sarathkumar, VS. (2022) A review on rheological characteristics, serviceability and failure analysis of steel fiber impregnated concrete. Materials Today: Proceedings, 66. pp. 1405-1412. ISSN 22147853

Vijayan, D.S. and Sivasuriyan, A. and Parthiban, P. and Jakimiuk, A. and Bayat, H. and Podlasek, A. and Vaverková, M.D. and Koda, E. (2022) A Comprehensive Analysis of the Use of SFRC in Structures and Its Current State of Development in the Construction Industry. Materials, 15 (19): 7012. ISSN 19961944

Vijendra Babu, D and Harish, Menta and Azarudeen, Mohamed and Reddy, Ravi Siva Kasi and Jose, Kevin (2020) Raspberry Pi based Real Time Vehicle Accident Intimation with Alert Message and Image Capture. IOP Conference Series: Materials Science and Engineering, 993 (1). 012081. ISSN 1757-8981

Vijendra Babu, D and Karthikeyan, C and Shreya and Kumar, Abhishek (2020) Performance Analysis of Cost and Accuracy for Whale Swarm and RMSprop Optimizer. IOP Conference Series: Materials Science and Engineering, 993 (1). 012080. ISSN 1757-8981

Vijendra Babu, D and Shijin, K V and Sreejith, N S and Sureshbabu, Anjana V and Karthikeyan, C (2020) Automatic Irrigation Systems for Efficient usage of Water using Embedded Control Systems. IOP Conference Series: Materials Science and Engineering, 993 (1). 012077. ISSN 1757-8981

Vijendra Babu, D and Sitaram, K and Reddy, Venkata Akhil and Kumar, Pavan and Ramki and Rajesh Kumar, T (2020) Remote Monitoring of COMA Patients Using Zigbee. IOP Conference Series: Materials Science and Engineering, 993 (1). 012082. ISSN 1757-8981

Vijendra Babu, D and Subramanian, P and Karthikeyan, R and Akash, N and Phanindra, U and Hemanth, G (2020) RFID and GSM based Automatic Dispensing and Monitoring of Sanitary Napkin Vending Machine for Menstrual Hygiene among Women. IOP Conference Series: Materials Science and Engineering, 993 (1). 012074. ISSN 1757-8981

Vinoth, S. and Shankar, S. Gowri and Gurusaravanan, P. and Janani, B. and Devi, J. Karthika (2019) Anti-larvicidal Activity of Silver Nanoparticles Synthesized from Sargassum polycystum Against Mosquito Vectors. Journal of Cluster Science, 30 (1). pp. 171-180. ISSN 1040-7278

Viswanath, R. N. and Lakshmanan, C. and Sampath Kumar, T. S. (2024) Doping effects on mechanical properties of nanoporous gold systems. Journal of Porous Materials, 31 (4). pp. 1247-1255. ISSN 1380-2224

Viswanathan, G. and Praveen, R. and Prabhu, L. and Prakash, S. (2021) Evaluating the machining parameters for milling P20 HH mould steel using a specific end mill. Materials Today: Proceedings, 46. pp. 8248-8253. ISSN 22147853

Yuvaraj, T. and Devabalaji, K. R. and Kumar, J. Anish and Thanikanti, Sudhakar Babu and Nwulu, Nnamdi I. (2024) A Comprehensive Review and Analysis of the Allocation of Electric Vehicle Charging Stations in Distribution Networks. IEEE Access, 12. pp. 5404-5461. ISSN 2169-3536

Yuvaraj, T. and Devabalaji, K. R. and Suresh, T. D. and Prabaharan, Natarajan and Ueda, Soichiro and Senjyu, Tomonobu (2023) Enhancing Indian Practical Distribution System Resilience Through Microgrid Formation and Integration of Distributed Energy Resources Considering Battery Electric Vehicle. IEEE Access, 11. pp. 133521-133539. ISSN 2169-3536

Yuvaraj, T. and Sengolrajan, T. and Prabaharan, N. and Devabalaji, Kaliaperumal Rukmani and Uehara, Akie and Senjyu, Tomonobu (2025) Enhancing Smart Microgrid Resilience and Virtual Power Plant Profitability Through Hybrid IGWO-PSO Optimization With a Three-Phase Bidding Strategy. IEEE Access, 13. 80796 - 80820. ISSN 21693536

Zahir Hussain, M. and Anbalagan, R. and Jayabalakrishnan, D. and Naga Muruga, D.B. and Prabhahar, M. and Bhaskar, K. and Sendilvelan, S. (2021) Charging of car battery in electric vehicle by using wind energy. Materials Today: Proceedings, 45. pp. 5873-5877. ISSN 22147853