Article

Antony Casmir Jayaseelan, G. and Samuvel Michael, B. and Elanthiraiyan, A. and Arun Kumar, M. N. and Mohammed Iqbal, N. (2025) Effect oF Cu2O Nanoparticle in Candlenut Biodiesel Blends in CI Engine. Springer, 79. pp. 355-362. ISSN 2662-3161

Antony Casmir Jayaseelan, G. and Samuvel Michael, B. and Subathra, M. and Vinoth, K. and Babu, T. (2025) Effect of Dual Biodiesel Blends with Ethanol as Additives in CI Engine. Advancements in Materials Processing Technology, Volume 3 (AMPT 2023), 79. pp. 157-165. ISSN 2662-3161

Ashokkumar, S. and Elanthiraiyan, A. and Ashique, K. K. Marwan Bin and Ahamed, Kannan and Rijin, K. (2024) Experimental Investigation on the Mechanical Properties of Al6061/B4C Composite Materials. Springer, 58. pp. 369-376. ISSN 2662-3161

Ashokkumar, S. and Natarajan, S. and Prabhahar, M. and Sivabalan, M. and Ravichandran, G. (2025) A Comparative Analysis of Heat Transfer in Elliptical and Straight Slot Cross-Sectional Spiral Pipes at Varying Fluid Velocities Using CFD Methodology Toward Efficiency. Springer, 79. pp. 363-372. ISSN 2662-3161

Ashokkumar, S. and Prabhahar, M. and Arvind, S. and Dhanasekar, S. (2025) Finite Element Analysis of Hybrid Helical Gear Models with Carbon Fiber-Reinforced Polymer Composite for Weight Reduction. Springer, 79. pp. 167-178. ISSN 2662-3161

Ayyasamy, Leema Rose and Mohan, Anbarasu and Vijayan, Dhanasingh Sivalinga and Sharma, Agoramoorthy Sattainathan and Devarajan, Parthiban and Sivasuriyan, Aravindan (2022) Finite element analysis of behavior and ultimate strength of composite column. Science and Engineering of Composite Materials, 29 (1). pp. 176-182. ISSN 2191-0359

Babu, B. Selva and Kalyanakumar, S. and Kumar, Saket (2024) Mechanical Characteristics of Silicon Carbide and Palm Kernel Shell Ash-Reinforced Ultrasonic Hybrid-Assisted Cast Aluminium Matrix Composites. Springer, 58. pp. 193-201. ISSN 2662-3161

Devarajan, Parthiban and Vijayan, Dhanasingh Sivalinga and Saravanabhavan, Shanmuga Sundar and Sivasuriyan, Arvindan and Sankaran, Naveen and Chrysanidis, Theodoros and Moujoud, Zineb (2024) Effect of Alkaline Activated Cashew Nut Shell Ash in the Stabilization of Weak Clayey Soil—An Experimental Study. Ceramics, 7 (4). pp. 1836-1854. ISSN 2571-6131

Dhanaraj, K. and Suresh Kumar, C. and Socrates, S. H. and Vinoth Arulraj, J. and Suresh, G. (2021) A comparative analysis of microwave assisted natural (Murex virgineus shell) and chemical nanohydroxyapatite: structural, morphological and biological studies. Journal of the Australian Ceramic Society, 57 (1). pp. 173-183. ISSN 2510-1560

Dhilipkumar, Thulasidhas and Arumugam, Soundhar and Rajesh, Murugan and Venkatesan, Raja and Sasikumar, R. and Al-Asbahi, Bandar Ali (2024) Evaluating the flexural and vibrational response of carbon nanotube strengthened co-cured sandwich composites. Carbon Letters, 34 (5). pp. 1443-1452. ISSN 1976-4251

Dhilipkumar, Thulasidhas and Arunpandian, Muthuraj and Arumugam, Soundhar and Sadeq, Abdellatif Mohammad and Karuppusamy, P. and Oh, Taehwan and Ahmed Awadh Bahajjaj, Aboud Ahmed Awadh and Shankar, Karthik V. and K, Selvakumar (2025) Exploring the synergistic effects of graphene on the mechanical and vibrational response of kenaf/pineapple fiber-reinforced hybrid composites. Polymer Composites, 46 (5). 4591 - 4604. ISSN 02728397; 15480569

Dhilipkumar, Thulasidhas and Venkatesan, Raja and Hiremath, Vinayak S. and Kesavan, S. and P, Karuppusamy and Shankar, Karthik V. and Alduhaish, Osamah (2024) Enhancing structural performance of 3D‐printed adhesively bonded flat‐joggle‐flat polymer joints with graphene‐reinforced adhesive. Polymer Composites, 45 (17). pp. 16335-16346. ISSN 0272-8397

Hiremath, Vinayak S. and Reddy, D. Mallikarjuna and Reddy Mutra, Rajasekhara and Sanjeev, Aditya and Dhilipkumar, Thulasidhas and J, Naveen (2024) Thermal degradation and fire retardant behaviour of natural fibre reinforced polymeric composites- A comprehensive review. Journal of Materials Research and Technology, 30. pp. 4053-4063. ISSN 22387854

Imthiyas, A. and Kumaran, P. and Saurag, R. and Premarajan, Prathyush (2025) Enhancing the Properties of Glass Fibre-Reinforced Polymer Composite by Almond Shell Powder. Advancements in Materials Processing Technology, Volume 3 (AMPT 2023), 79. pp. 103-112. ISSN 2662-3161

Imthiyas, A. and Sathiyaraj, S. and Sanjay, K. P. and Mohammad Nadir, A. J. and Mukhil Murali, M. (2024) Micro-hole Formation Characteristics of C35600 Alloy Using Laser Drilling. Springer, 58. pp. 411-418. ISSN 2662-3161

Imthiyas, A. and Sathiyaraj, S. and Silambarasan, R. and Ramkumar, V. (2025) Preparation and Mechanical Characterization of TiC Particles Reinforced Al6061 Alloy Composites. Springer, 79. pp. 337-344. ISSN 2662-3161

Jayaseelan, G. Antony Casmir and Mahesh, R. and Sarath, M. J. and Arjun Ram, V. and Raj, Vyshak (2024) Dispersion and Effect of Nanoparticle in Soapnut Biodiesel and Its Performance Analysis. Springer, 58. pp. 419-427. ISSN 2662-3161

Jeyakanthan, M. and Shinyjoy, Elangomannan and Subramanian, Uma Maheshwari and Anbazhagan, Venkattappan (2025) Structural, optical and magnetic properties of Co doped PbWO4 and CaWO4 nanomaterials. Journal of the Australian Ceramic Society. ISSN 25101560; 25101579

Kalyanakumar, S. and Natarajan, S. and Saravanakumar, M. and Sahadevan, Ashwin and Eggen, P. T. and Hrishikesh, N. (2024) Optimizing Machining Performance of Heat-Treatable Aluminum Alloys Through MQL Condition Parameter Turning in High-Speed Machining. Springer, 58. pp. 243-251. ISSN 2662-3161

Krishnamoorthi, Sangeetha and Ayyappan, A. and Sathiya, Agin and SriKumar, A (2025) Enhancing Thermal and Combustibility Properties of Glass Fibre Reinforced Composites: A Comparative Study of Synthetic and Castor Oil-Based Bio-Epoxy. Springer, 79. pp. 191-202. ISSN 2662-3161

Krishnamoorthi, Sangeetha and Prabhu, L. and Rahil, Md. and Nagasai, Kollimarla and Faim, Md. (2025) Experimental Investigation of Diesel Engine Using Chlorella Algae-Acetylene by Dual Fuel Mode. Springer, 79. pp. 69-79. ISSN 2662-3161

Krishnamoorthi, Sangeetha and Thiagarajan, C. and Prabhahar, M. and Raghunathan, Anandhu K. and Deepak, P. V. (2025) Performance and Emission Characteristics of Soapnut Methyl Esters-Diesel Blends Between VCR and Tata Zip XL Engine. Springer Proceedings in Materials, 79. pp. 251-261. ISSN 2662-3161

Kumar, M. Saravana and Prabhahar, M. and Ajithkumar, B. and Guhan, P. and Ramesh, Aravind and Kumar, T. S. Athithya (2024) A Comprehensive Investigation of the Electric Two-Wheeler Fabrication Process from Conventional to Cutting-Edge Approach. Springer, 58. pp. 275-283. ISSN 2662-3161

Kumaran, P. and Sathiyaraj, S. and Salim, Adith and Unnikrishnan, Asish and Boyapati, Rajesh (2024) Mechanical Behavior of GFRP with Plantain, Coir, and Sugarcane Fiber-Reinforced Hybrid Composite. Springer, 58. pp. 181-192. ISSN 2662-3161

Kumaran, P. and Sathiyaraj, S. and Selva Babu, B. and Yogeswar, S. and Murugan, T. (2025) Design and Analysis of Hybrid Sandwich Layered Industrial Safety Helmet. Springer, 79. pp. 317-328. ISSN 2662-3161

Mahesh, R. and Sangeetha, S. and Michael, B. Samuvel and Rishikesh, K. and Shabu, Roshan A. and Krishnan, P. Akshay (2024) Examination on Characteristics Features of Papaya Seed Biodiesel Emissions in VCR Engine Using Various Nozzles. Springer, 58. pp. 285-293. ISSN 2662-3161

Mahesh, R. and Senthilkumar, A. and Antony Casmir Jayaseelan, G. and Sooraj, K. and Sayooj, P. and Punnoose, Alvin Mathews (2024) Laser Micromachining—An Overview. Springer, 58. pp. 213-221. ISSN 2662-3161

Parthiban, D. and Vijayan, D. S. and Arunachalam, S. and Kumar, Himanshu and Kumar, Bitu and Kumar, S. Naveen and Sankaran, Naveen (2025) Synergic Effect of Cashew Nutshell Ash as Partially Replaced Binding Material in Cement Concrete- an Experimental Study. Springer, 79. pp. 395-407. ISSN 2662-3161

Patrick, Joselene Suzan Jennifer and Subrayapillai Ramakrishna, Niranjana and Sankar, Muthupandi and Joseph, Madhavan and Moses, Victor Antony Raj and Saravanabhavan, Shanmuga Sundar and Appusamy, Muthukrishnaraj and Ayyar, Manikandan (2024) Examination of hybrid electrode material for energy storage device supercapacitor under various electrolytes. Carbon Letters, 34 (6). pp. 1639-1652. ISSN 1976-4251

Prabhu, L. and Baskaran, T. and Krishnamoorthi, Sangeetha and Saravanan, M. (2024) Dissimilar Metal Welds and Weld Joint Analysis for Duplex with Super Duplex Stainless Steel Plate Joint by Semi-automatic TIG Welding. Springer, 58. pp. 387-397. ISSN 2662-3161

Prabhu, L. and Krishnamoorthi, Sangeetha and Prakash, S. and Ashok, Akshay and Vishnu, P. V. (2024) Development of Computerized Shell-and-Tube Heat Exchanger System in Co-Current, Counter-Current Mode, and Cross-Flow Type. Springer, 58. pp. 327-335. ISSN 2662-3161

Prakash, S. and Prabhahar, M. and Abdul Kalam, V. and Naveen Kumar, G. and Prabhakaran, D. (2024) Investigated the Effect of Laser Cutting Parameters on Ti6al4v Cut Quality Using the RSM. Springer, 58. pp. 253-263. ISSN 2662-3161

Prakash, S. and Prabhahar, M. and Kumar, M. Saravana and Tholkappiyan, K. and Aravind, S. (2025) CFD Simulation of Heat Transfer Analysis—Thermal Effect of Phase Change Materials in Buildings. Springer, 79. pp. 93-102. ISSN 2662-3161

Rabi, J. and Balusamy, T. and Raj Jawahar, R. (2019) Analysis of vibration signal responses on pre induced tunnel defects in friction stir welding using wavelet transform and empirical mode decomposition. Defence Technology, 15 (6). pp. 885-896. ISSN 22149147

Ramasamy, Nithya and Sivalingam, Anbudayanidhi and Saravanabhavan, Shanmuga Sundar and Palani, Kavitha Nagarasampatti and Natesan, Balasubramanian (2024) Preparation and evaluation of physicochemical studies of novel natural cellulose microfibril (CMF) reinforced poly (sodium acrylate) hydrogel. Carbon Letters, 34 (2). pp. 743-755. ISSN 1976-4251

Rubesh Ashok Kumar, S. and Vasvini Mary, D. and Suganya Josephine, G.A. (2025) Incorporation of W Ce oxides on Ti3C2Tx/gC3N4 bi-layers: An efficient photocatalyst under visible/sunlight irradiation. FlatChem, 53. p. 100920. ISSN 24522627

Samuvel Michael, B. and Krishnamoorthi, Sangeetha and Senthilkumar, A. and Raj Kumar, G. and Praveen Kumar, C. (2025) Exploring the Impact of Varied Injection Angle on the Performance of a Variable Compression Ratio (VCR) Engine Fueled by Biodiesel from Plastic Waste. Springer, 79. pp. 129-137. ISSN 2662-3161

Saravana Kumar, M. and Prabhahar, M. and Prakash, S. and Hari Krishnan, H. R. and Vijay, B. (2025) Improvement of a Battery Pack Enclosure Fabricated from a Polymer Composite Material for Electric Vehicles. Springer, 79. pp. 287-296. ISSN 2662-3161

Saravana Kumara, M. and Kalyanakumar, S. and Prabhahar, M. and Mathew, Job. K. Sam and babu, Bijith and Nitin, P. S. (2024) Application of Response Surface Methodology to Optimize Cutting Process Parameters in Aluminum Silicon Alloy Drilling. Springer, 58. pp. 265-273. ISSN 2662-3161

Saravanan, M. and Krishnamoorthi, Sangeetha and Saravanakumar, M. and Devarjun, V. S. and Lal, Abhinandh (2025) Investigating Clamshell-Derived NHAp Composites with PLGA and Chitosan for Advancements in Bone Healing. Springer, 79. pp. 275-285. ISSN 2662-3161

Saravanan, M. and Kumar, M. Saravana and Venu, Akhil and Oommen, Alan Sam and Arjun, K. S. (2024) Smart Mechatronic Incinerator: A Sustainable Solution for Controlled Waste Combustion and Emission Management in IoT Environment. Springer, 58. pp. 305-315. ISSN 2662-3161

Saravanan, M. and Venkatesan, V. and Prabhu, L. and Krishnamoorthi, Sangeetha (2024) Study of Mechanical Behavior and Wear Characteristics of Aluminum Alloy 7178–Fly Ash Composites. Springer, 58. pp. 231-241. ISSN 2662-3161

Sathiyaraj, S. and Jayaseelan, G. Antony Casmir and Arunprasanth, S. and Divakar, R. and Veeramani, B. (2024) Design and Fabrication of Manual Drive Centrifugal Screw Conveyor Water Pump. Springer, 58. pp. 317-325. ISSN 2662-3161

Sathiyaraj, S. and S.Venkatesan and Mathew, Binson and SimsarulHaq, K. K. and Kumar, Prince (2024) Production of ECMM Micro-Holes on Brass C35335. Springer, 58. pp. 223-229. ISSN 2662-3161

Sathiyaraj, S. and Venkatesan, S. and Meena, Roshan Lal and Sahoo, Sims Smruti Ranjan (2025) Development of a Hydrogen-Fueled Transit Vehicle. Science Talks, 79. pp. 225-232. ISSN 27725693

Selva Babu, B. and Bubesh Kumar, D. and Prabhu, L. and Sudhir Kumar Yadav, K. (2025) Microstructural Behaviour of Spark Plasma Sintered Carbon Nanotube + Ti6Al4V Nanocomposites. Springer, 79. pp. 435-442. ISSN 2662-3161

Selva Babu, B. and Sathiyaraj, S. and Balaguru, G. and Nambu Selvam, S. (2025) Tool Condition Monitoring of Friction Stir Welding—A Machine Learning Approach. Science Talks, 79. pp. 243-250. ISSN 27725693

Selvakumar, D. and Nagaraju, P. and Arivanandhan, M. and Jayavel, R. (2021) Metal oxide–grafted graphene nanocomposites for energy storage applications. Emergent Materials, 4 (5). pp. 1143-1165. ISSN 25225731; 2522574X

Senthil, J. and Kumar, Manisaravana and Thiagarajan, C. and Prabhahar, M. (2024) Synthesis and Evaluation of Zircon and Al2O3 Zircon-Reinforced AA6061 Alloy Composites in Age-Hardened Condition. Springer, 58. pp. 337-350. ISSN 2662-3161

Senthil, J. and Thiagarajan, C. and Prabhahar, M. and Mathew, Ashik John and Shaji, Melvin and Ajmal, Mohamed (2024) Performance and Emission Characteristics of Variable Compression Ratio Diesel Engines Fuelled with Safflower Seed Oil Blends. Springer, 58. pp. 429-439. ISSN 2662-3161

Senthilkumar, A. and Prabhu, L. and Chandran, Sarath and Jose, Jestin Sam and Kumar, T. Nirmal Raj (2024) Design and Modelling of Swimwagon Prototype Utilizing L298 Module Arduino. Springer, 58. pp. 377-386. ISSN 2662-3161

Senthilkumar, A. and Selva Babu, B. and Madhan Raj, L. and Tharun, R. (2025) Preparation and Microstructure Behaviour of CNT/Ceramic Materials by Using Spark Plasma Sintering. Springer, 79. pp. 443-449. ISSN 2662-3161

Senthilkumar, A. and Selva Babu, B. and Pramanik, Manoj Kumar and Dubey, Nitiyanand (2025) Experimental Data and R600a Vapor Refrigerator Prediction Employing Al2O3/SiO2 Nanolubricants Adopting Adaptive Neuro-fuzzy Inference System Model. Predicting R600a Vapor Refrigerator Performance Using ANFIS with Al₂O₃/SiO₂ Nanolubricants, 79. pp. 139-146. ISSN 2662-3161

Shanmugam, D. and Thirumurugan, Rama and Thiruchitrambalam, M. and Latha, C. and Maheshkumar, B (2023) Experimental investigation on the mechanical, thermal and acoustic characteristics of cellulose/synthetic fiber/nano clay hybrid composites: Influence of treatment, moisture and layering pattern. Composites Part A: Applied Science and Manufacturing, 168. p. 107497. ISSN 1359835X

Suganya Josephine, Gali Anthoni and Arumugam, Sivasamy (2021) Facile synthesis of N doped ZnO Coral bundles for enhanced photocatalytic and antimicrobial activity. International Journal of Ceramic Engineering & Science, 3 (4). pp. 180-191. ISSN 2578-3270

Surendrababu, K. and Michael, B. Samuvel and Prabhahar, M. and Sukesan, Abhijith and Suresh, Adarsh and Suresh, Nidhin (2024) Fabrication of Screw Pump for Hydraulic Applications. Springer, 58. pp. 359-368. ISSN 2662-3161

Surendrababu, K. and Prabhahar, M. and Prakash, S. and Naveen Kumar, B. and Sapthasarathy, C. and Gowthaman, K. (2024) Exhaust Gas Recirculation Method to Impact the Di Diesel Engine Running on Pumpkin Seed Oil Methyl Ester. Springer, 58. pp. 399-409. ISSN 2662-3161

Surendrababu, K. and Prakash, S. and Thiagarajan, C. and Sathish, V. and Sathish, D. (2025) Modification and Analysis of Impact Beam on Car Door. Design Modification and Impact Analysis of Automotive Door Beams, 79. pp. 307-316. ISSN 2662-3161

Suresh Kumar, C. and Dhanaraj, K. and Vimalathithan, R.M. and Ilaiyaraja, P. and Suresh, G. (2020) Hydroxyapatite for bone related applications derived from sea shell waste by simpleprecipitation method. Journal of Asian Ceramic Societies, 8 (2). pp. 416-429. ISSN 2187-0764

Suriya Prakash, M and Dhilipkumar, T and Sadeq, A.M and Shankar, K.V and Karuppusamy, P and Karim, M.R and Murali, A.P and K, K and Dinesh Kumar, N (2025) Synergistic enhancement of mechanical and water resistance properties in snake grass/luffa cylindrica fiber composites integrated with silicon carbide additive. Polymer Composites, 46 (15). pp. 13881-13892. ISSN 02728397; 15480569

Suriya Prakash, M. and Sadeq, Abdellatif M. and Karuppusamy, P and Shankar, Karthik V. and Dhilipkumar, Thulasidhas and Sabeur, Hassen and Tank, Gaurang and Selvakumar, Karuppaiah (2025) Assessing the Effect of Coco Shell Powder Integration on the Mechanical and Water Absorption Performance of Snake Grass and Luffa Cylindrica Fiber Reinforced Hybrid Composites. Polymer Composites. ISSN 0272-8397

Thiagarajan, C. and Krishnamoorthi, Sangeetha and Adithyan, P. and Ajmal, P. A. and Adwaith, M. P. (2025) Optimization and Tribological Behaviour of Stir Cast Aluminium MMC’s by Taguchi Method. Springer, 79. pp. 33-47. ISSN 2662-3161

Thiagarajan, C. and Prabhahar, M. and Prakash, S. and Karthick Raja, M. and Kumar, D. and Thangapandiyan, A. (2024) Performance and Emissions Characteristics of Algae Oil Methyl Ester with Different Methanol Injection Positions in Dual-Fuel Engine. Springer, 58. pp. 295-303. ISSN 2662-3161

Thiagarajan, C. and Prabhahar, M. and Senthil, J. and Vignesh, G. and Kumar, Suresh (2025) Efficient Biodiesel Production from Mahua Seed Oil Using Acid and Base-Catalysed Transesterification: Process Optimization and Quality Assessment. Advancements in Materials Processing Technology, Volume 3 (AMPT 2023), 79. pp. 213-223. ISSN 2662-3161

Thiruchitrambalam, M. and Prabahahr, M. and Prakash, S. and Zulfigar, Mohammed and Shaji, Abhishek and Sivasubramanian, Palanisamy (2024) Fabrication of Tampico-Reinforced Natural Rubber Composite and the Evaluation of Mechanical Properties. Springer, 58. pp. 203-211. ISSN 2662-3161

Thiruchitrambalam, M. and Prabhahar, M. and Prakash, S. and Antony Rahul, P. W. and Arun Dev, A. and Varghese, Eldho (2024) A Review on Recycling of Waste PET Plastics for Manufacturing Composite Materials. Springer, 58. pp. 351-358. ISSN 2662-3161

Venkataesan Kumari, Bhuvaneshwari and Mani, Renuka and Asokan, Balakrishnan Ramajayam and Balakrishnan, Karthikeyan and Ramasamy, Arulmani and Parthasarathi, Rengasamy and Kandasamy, Chitra and Govindaraj, Rubalakshmi and Vijayakumar, Natesan and Vijayakumar, Sekar (2023) Green Synthesised Silver Nanoparticles Using Anoectochilus elatus Leaf Extract: Characterisation and Evaluation of Antioxidant, Anti-Inflammatory, Antidiabetic, and Antimicrobial Activities. Journal of Composites Science, 7 (11). p. 453. ISSN 2504-477X

Venkatesan, Raja and Alagumalai, Krishnapandi and Jebapriya, M. and Dhilipkumar, Thulasidhas and Almutairi, Tahani Mazyad and Kim, Seong‐Cheol (2024) Enhancing PBAT nanocomposite films: The impact of AgVO3 nanorods on mechanical, hydrophobicity, and antibacterial properties. Polymer Composites, 45 (16). pp. 15340-15355. ISSN 0272-8397

Vijayakumar, K. and Bubesh Kumar, D. and Parida, Sanjaya Kumar and Behera, Tutu (2025) Design and Development of an Upper Limb Exoskeleton with EMG Sensor-Based Control. Springer, 79. pp. 297-305. ISSN 2662-3161

null, null and Devaraj, Vasvini Mary and Lenin, Rachel Angeline and Sandran, Nagarani and Chang, Jihhsing and G A, Suganya Josephine (2025) Impact of WO3:CeO2@MXene/gC3N4 nano disk on sunlight-driven photocatalytic removal of fluoroquinolone antibiotic and high-performance supercapacitor application. Carbon Letters. ISSN 22334998; 19764251