UNSPECIFIED (2018) Experimental Investigation on Linde-Hampson Refrigerating System Operating with Different Blends of Hydro-Carbons as Alternate Refrigerants. Journal of Applied Fluid Mechanics, 11 (SI). ISSN 17353572

Aamer, Najmuddin and Ramachandran, S (2017) Neural network, VLSI approach for autonomous robot navigation. In: 2017 2nd International Conference on Communication and Electronics Systems (ICCES), Coimbatore.

Anandan, R. and Sivaraman, G. and Rajasankar, M. and Girimurugan, R. (2023) CFD Analysis of Heat Transfer Coefficient and Pressure Drop in a Shell and Tube Heat Exchanger for Various Baffle Angles. Scopus. pp. 49-60. ISSN 2195-4356

Aravindhan, A. and Ayyadurai, Gandhimathi Kaliyamoorthi and Jayaprakash, R. and SenthilNathan, Gopinathan and Basha, I. Ameeth and Sathish, Rengarajan (2025) Synthesis, Characterization and Coating Studies of Poly (5-Indanyl Methacrylate)-Methyl methacrylate Polymer on Pulsed Fiber Laser Arc Welded 316L Steel. International Journal of Vehicle Structures and Systems, 17 (2). 345 - 349. ISSN 09753540; 09753060

Arunkumar, S. and Kumaravel, P. and Velmurugan, C. and Senthilkumar, V. (2018) Microstructures and mechanical properties of nanocrystalline NiTi intermetallics formed by mechanosynthesis. International Journal of Minerals, Metallurgy, and Materials, 25 (1). pp. 80-87. ISSN 1674-4799

B, Kiruthiga and Mohamed Abuthahir Riazulhameed, Arshadh Ariff and M, Rajapriya. and Sarasu, R. and Mohankumar, N. and Kasthuri, A. (2024) Predictive Analytics for Hospital Readmissions Using Logistic Regression and IoT Sensor Data. In: UNSPECIFIED.

Balachandar, B.K. and Logu, T. and Ramprasath, R. Hari and Sankarasubramanian, K. and Soundarrajan, P. and Sridharan, M. and Ramamurthi, K. and Sethuraman, K. (2020) Spray pyrolysis deposited CdO: Al films for trimethylamine sensing application. Materials Science in Semiconductor Processing, 105. p. 104753. ISSN 13698001

Balachandar, Ramalingam and Navaneethan, Rajendran and Biruntha, Muniyandi and Ashok Kumar, Krishna Kumar and Govarthanan, Muthusamy and Karmegam, Natchimuthu (2022) Antibacterial activity of silver nanoparticles phytosynthesized from Glochidion candolleanum leaves. Materials Letters, 311. p. 131572. ISSN 0167577X

Balaji, N. and Arul, T.G. and Madhloom, M.A. and Wadki, Venkatesh and Kumar, Ashok and Saravanakumar, S. and Santhanam, Raghavan and Krishnan, V.K. (2023) Effect of Fiber Length and Loading on the Mechanical Characterization of Cyperus Pangorei Fiber Reinforced Vinyl Ester Composites. International Journal of Vehicle Structures and Systems, 15 (3). ISSN 0975-3060

Balsingh, Samuvel Michael and Krishnamoorthi, Sangeetha and Prakash, S. and Babu, J. M. (2025) Analysis of Performance, Combustion Dynamics and Emission Profiles of a VCR Multi-Fuel Engine with Ethanol-Plastic Oil Blend. International Journal of Vehicle Structures and Systems, 17 (1). 1 - 9. ISSN 09753540; 09753060

C, Thiagarajan and M, Prabhahar and J, Senthil and M, Saravanakumar and S, Prakash (2023) Experimental Analysis on Performance and Emissions of Mahua Pyro Oil Biodiesel Blends as a Fuel for DI-CI Diesel Engine: A Sustainable Alternative for Reducing Engine Emissions. International Journal of Mechanical Engineering, 10 (10). pp. 1-11. ISSN 23488360

Chinnakutti, Karthik Kumar and Panneerselvam, Vengatesh and Thankaraj Salammal, Shyju (2021) Impact of Cu addition on the optoelectronic properties of Zn3N2 thin films: n to p-type transitions. Materials Science and Engineering: B, 265. p. 115039. ISSN 09215107

D, Vasvini Mary and S, Rubesh Ashok Kumar and G A, Suganya Josephine (2024) Tremella-like dysprosium oxide/Mxene/graphitic carbon nitride tertiary nanocomposite: Photocatalytic evaluation under visible light irradiation. Diamond and Related Materials, 148. p. 111411. ISSN 09259635

Dhakshnamurthy, Vinod Kumar and Govindan, Murali and Sreerangan, Kannan and Nagarajan, Manikanda Devarajan and Thomas, Abhijith (2024) Brain Tumor Detection and Classification Using Transfer Learning Models. In: UNSPECIFIED.

Dhanaraj, K. and Adhitiyan, T. and Gubendhiran, S. and Thenpandiyan, E. and Ilaiyaraja, P. and Sagadevan, Suresh and Suresh, G. (2024) Cardiospermum halicacabum leaf extract assisted Ag and Zn doped biocompatible nanohydroxyapatite photocatalyst for efficient dye degradation from wastewater. Materials Science and Engineering: B, 308. p. 117568. ISSN 09215107

Eswaramoorthy, Nandakumar and Leelavathi, Harikrishnan and Selvaraj, Yogapriya and Shyma, Arunkumar Prabhakaran and Kumaresan, Lakshmanan and Rajesh, Priyadarshini and Raguram, T. (2025) Eco-friendly carbon quantum dots from coffee waste: Improving charge transfer in solid-state perovskite solar cells. Diamond and Related Materials, 156. ISSN 09259635

G. Saravanan et al.,, G. Saravanan et al., (2019) Performance Studies on the Reversing Valve Incorporated Air-to-Water Heat Pump with Heat Storage Device. International Journal of Mechanical and Production Engineering Research and Development, 9 (3). pp. 109-118. ISSN 2249-6890

Ganesh, S. and Venkatesan, S. (2021) Evolution of Flexible Modular Electric Vehicle Platforms among Automotive Industry and its Influence on Battery Integration. International Journal of Vehicle Structures and Systems, 13 (3). ISSN 0975-3060

Govindan, Murali and Dhakshnamurthy, Vinod Kumar and Sreerangan, Kannan and Nagarajan, Manikanda Devarajan and Rajamanickam, Suresh Kumar (2024) A Framework for Early Detection of Glaucoma in Retinal Fundus Images Using Deep Learning. In: UNSPECIFIED.

Harikrishnan, A and Ramalingam, Balachandar and Nadeem, Ahmed and Ramachandran, Balajee and Veena, Vijay Kumar and Muthupandian, Saravanan (2024) Eco-friendly synthesis of zinc oxide nanoparticles (ZnOnps) from Piper betel leaf extract: spectral characterization and its application on plant growth parameters in maize, fenugreek and red gram. Materials Technology, 39 (1). ISSN 1066-7857

Harinarayanan, G. and Krishnan, V.K. and Natarajan, M.P. and Surender, V. and Gowthaman, J. (2022) Wear Behavior and Wear Worn Surface Analysis on Hardox Steel. Key Engineering Materials, 935. pp. 99-104. ISSN 1662-9795

J, Senthil and M, Prabhahar and C, Thiagarajan and S, Prakash and M, Saravana Kumar (2023) Evaluating Diesel Engine Performance with Blended Fuels from Low-Density Plastic Pyrolysis Oil: A Sustainable Approach to Diesel Engine Operation. International Journal of Mechanical Engineering, 10 (10). pp. 26-36. ISSN 23488360

Jayaraman, R. and Edwin Joseph, R. and Maheskumar, Ponnuswamy and Kiruthiga Devi, V. and Venkataramanan, A. R. and Kiran, Uday and Muthulakshmanan, Arumugam and Kondusamy, V. and Murugan, K. Vetrivel and Girimurugan, R. (2025) Analysis of Characteristics of PCM Inside Altered Design of Shell and Tube Thermal Energy Storage Unit. International Journal of Vehicle Structures and Systems, 17 (1). 20 - 27. ISSN 09753540; 09753060

Jayaraman, R. and Sivalingam, A. and Rahul, S. and Prabaharan, V. and Nanthakumar, S. and Hasane Ahammad, Sk. and Girimurugan, R. (2024) Square Pyramid and Single Slope Solar Still: Experimental Analysis for Various Depth of Water. Springer. pp. 29-39. ISSN 2195-4356

Kaliappan, A. S. and Mohanamurugan, S. and Nagarajan, P. K. (2020) Numerical Investigation of Sinusoidal and Trapezoidal Piston Profiles for an IC Engine. Journal of Applied Fluid Mechanics, 13 (1). pp. 287-298. ISSN 17353572

Kalyanakumar, S. and Natarajan, S. and Muthusamy, Prabhahar and Saravanakumar, M. (2024) Influence of Pre-Aging Treatment and Process Parameters Effects of Mechanical Properties in AA 6061- T6 By Ranking Algorithm and ANOVA Methods. International Journal of Vehicle Structures and Systems, 16 (3). ISSN 0975-3060

Kalyanakumar, S. and Natarajan, S. and Prabhahar, M. and Saravanakumar, Manickam Puratchiveeran and Sudhakaran, P. and Suresh, Nidhin (2025) TRUST-Based Optimization of High-Performance Machining Process Parameters of Aluminum for Enhanced Product Quality in Automotive Manufacturing. International Journal of Vehicle Structures and Systems, 17 (1). 104 - 114. ISSN 09753540; 09753060

Krishnasastry, K V and Dhanalakshmi, S and Seshagirirao, V and Palanikumar, K (2010) UNSPECIFIED In: International Conference on Frontiers in Automobile and Mechanical Engineering (FAME 2010), Chennai.

Loganathan, S. and Leenus Jesu Martin, M. and Nagalingam, B. and Prabhu, L. (2018) Heat release rate and performance simulation of DME fuelled diesel engine using oxygenate correction factor and load correction factor in double Wiebe function. Energy, 150. pp. 77-91. ISSN 03605442

M, Prabhahar and K, Rajan and K, Surendrababu and S, Nallusamy and S, Prakash and J, Naveen Raja (2023) Experimental Analysis and Investigation on Enhanced Combustion and Reduced Emissions of Diesel Engines Using Emulsified Biodiesel. International Journal of Mechanical Engineering, 10 (12). pp. 8-18. ISSN 23488360

M, Prabhahar and R, Venkatesh and S, Nallusamy and S, Prakash (2023) Combustion and Performance Characteristics of a Lanthanum-Cerium Oxide Coated DI Diesel Engine Fueled with Lemon Grass Oil Methyl Ester and Di-Ethylene Glycol as Additives. International Journal of Mechanical Engineering, 10 (8). pp. 49-59. ISSN 23488360

M, Prabhahar and S, Prakash and S, Nallusamy and K, Rajan and H, Gopikrishna and K, Sanjay Krishna (2023) Performance, Combustion and Emission Characteristics of a Diesel Engine with the Effect of TiO2 Nano Additives in Diesel-Tamarind Oil Blends. International Journal of Mechanical Engineering, 10 (11). pp. 1-11. ISSN 23488360

M, Prabhahar and S, Prakash and S, Nallusamy and S, Ponnarasu and Reddy, Yeddula Deekeshwar (2024) Optimization of Operating Factors and Blending Levels of Diesel, Algae Methyl Ester, Graphene Oxide and Producer Gases - Calorific Values Using Response Surface Methodology in HCCI Engine. International Journal of Mechanical Engineering, 11 (1). pp. 1-15. ISSN 23488360

Maheshwari, A. and DoraiRangaswamy, M. A. (2016) Multimodal biometrics security system for authentication. In: 2016 Second International Conference on Science Technology Engineering And Management (ICONSTEM), Chennai, India.

Manu, Y. M. and Manepalli, Sailaja and Muthukumarasamy, S. and Jayaraman, R. and Jeeva, L. G. and Selvaraju, Mayakannan (2025) Optimization of Underwater Friction Stir Welding Parameters for AA5128 and AA 7075 Aluminum Alloy using Response Surface Methodology. International Journal of Vehicle Structures and Systems, 17 (3). 520 - 531. ISSN 09753540; 09753060

Muthukumaran, D. and Ranganathan, Chitra Sabapathy and Sivapriya, N. and Ramadevi, R. and Sankar, T.C and Sasikala, P. (2024) Leveraging IoT for Real-Time Air Quality Sensing and Optimization in Vehicle Interiors using Gradient Boosting Algorithm. In: UNSPECIFIED.

Nagarajan, Fedal Castro and Kannaiyan, SathishKumar and Boobalan, Chitra (2020) Intensification of heat transfer rate using alumina-silica nanocoolant. International Journal of Heat and Mass Transfer, 149. p. 119127. ISSN 00179310

Nallusamy, Senthilkumar and Selvaraj, Yogapriya and Ravi, Logesh and Karthikeyan, K. and Pandiaraj, Saravanan and Alodhayb, Abdullah N. and Alzahrani, Khalid E. and Eswaramoorthy, Nandhakumar and Annamalai, Selvalakshmi and Asaithambi, Sasikumar (2024) Optimizing symmetric supercapacitor performance through rational design of Zr/Cu/Fe Oxide-Modified Poly(vinyl alcohol) hybrid nanofibers. Materials Science and Engineering: B, 309. p. 117645. ISSN 09215107

Narasiman, Venkatraman (56600697000) and Jeyakumar, Suppandipillai (36819956300) and Mani, Muthu (56600022600) (2013) Optimizing the compression ratio of C.I engine fuelled in sardine oil ethyl ester.

Nithya, S. and Jeyaseelan, G. Antony Casmir and Ali Alharbi, Sulaiman and Alfarraj, Saleh and Jhanani, G. K. (2023) Prediction of Waste Chicken Fat Biodiesel Blends as the Potential Substitute for the Diesel Engine With Oxygenated Additives. Journal of Energy Resources Technology, 145 (9). ISSN 0195-0738

Parvathy, Subramanian and Manjula, Ganesan and Balachandar, Ramalingam and Subbaiya, Ramasamy (2022) Green synthesis and characterization of cerium oxide nanoparticles from Artabotrys hexapetalus leaf extract and its antibacterial and anticancer properties. Materials Letters, 314. p. 131811. ISSN 0167577X

Pavithra, M.R and Priyadarshini, S. and Sangeethalakshmi, K. and Maria Sampoornam, M and Senthil, S. and Srinivasan, C. (2024) Optimizing Combustion Efficiency in Cloud-Connected Smart Gasoline Engines using Gradient Boosting Machines. In: UNSPECIFIED.

Prabhahar, M. and Rajan, K. (2013) Performance and combustion characteristics of a diesel engine with titanium oxide coated piston using Pongamia methyl ester. Journal of Mechanical Science and Technology, 27 (5). pp. 1519-1526. ISSN 1738-494X

Prabhu, L. and Dhanalakshmi, K. and Alahmadi, Tahani Awad and Alharbi, Sulaiman Ali and Sołowski, Gaweł and Veeman, Dhinakaran (2023) How Do Microalgae Biodiesel Blends Affect the Acoustic and Vibration Characteristics of the Direct Injection Diesel Engine: An Experimental Examination. Journal of Energy Resources Technology, 145 (11). ISSN 0195-0738

Prabhu, L. and Shenbagaraman, S. and Anbarasu, A. and Muniappan, A. and Suthan, R. and Veza, Ibham (2023) Prediction of the Engine Performance and Emission Characteristics of Glycine Max Biodiesel Blends With Nanoadditives and Hydrogen. Journal of Energy Resources Technology, 145 (11). ISSN 0195-0738

Pruthviraj, R. D. (15119782400) and Krupakara, P. V. (15119245400) and Nagaswarupa, H. P. (16307909900) (2006) Open circuit potential studies of Za-27 / Sic Mmc's in acid chloride mediums. Transactions of the SAEST (Society for Advancement of Electrochemical Science and Technology).

REMOVED, REMOVED (2018) REMOVED. International Journal of Mechanical and Production Engineering Research and Development, 8 (2). pp. 899-906. ISSN 2249-6890

Rabi, J. and Balusamy, T. and Raj Jawahar, R. (2019) Analysis of vibration signal responses on pre induced tunnel defects in friction stir welding using wavelet transform and empirical mode decomposition. Defence Technology, 15 (6). pp. 885-896. ISSN 22149147

Raja, S. and Babu, R. Ramesh and Ramamurthi, K. (2018) Magnetic and photocatalytic properties of bismuth doped KNbO 3 microrods. Materials Research Bulletin, 105. pp. 349-359. ISSN 00255408

Rajasekaran, Mahesh and Krishnamoorthi, Sangeetha and Ganesh, P. Ravichandra and Vijayakumar, A. and Yugendran, S. (2025) Synergistic Enhancement of Diesel Engine Performance and Emissions through Jackfruit Peel Biodiesel Blends: An Experimental Investigation. International Journal of Vehicle Structures and Systems, 17 (1). 79 - 83. ISSN 09753540; 09753060

Rajasekaran, Mahesh and Krishnamoorthi, Sangeetha and Vijayaragavan, Mathanraj (2024) An experimental investigation of the effects of blending camphor oil infused with jack fruit biodiesel and nanoparticles on the performance, combustion, and exhaust emissions of a compression ignition engine. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Rajendran, Ranjith and Rojviroon, Orawan and Arumugam, Priyadharsan and Natchimuthu, Karmegam and Vasudevan, Vasanthakumar and Kannupaiyan, Jothimani and Muangmora, Rattana and Phouheuanghong, Phoutthideth and Rojviroon, Thammasak (2024) Design and fabrication of g-C3N4/Bi2S3 heterojunction photocatalysts for efficient organic pollutant degradation and antibacterial activity. Journal of Alloys and Compounds, 976. p. 173116. ISSN 09258388

Rajesh, K S and Kalaiselvi, S. and Sathyanathan, P. and Sudha, K. and Kavitha, G. and Murugan, S. (2024) Smart Vending Machines: Improving Service Quality with Integrated Controllers and SVM Algorithm. In: UNSPECIFIED.

Rajesh, Murugan and Venkatesan, Raja and Kesavan, S. and Murali, Arun Prasad and Sasikumar, R. and Kim, Seong-Cheol and Dhilipkumar, Thulasidhas and Al-Asbahi, Bandar Ali (2024) Influence of 3D printed adherend design on structural performance and vibrational behaviour of adhesively bonded joints. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46 (7). ISSN 1678-5878

Rajeswaran, P. and Raja, G. and Raja, Murugan and Sunderraj, A. Gilbert and Umavathy, K. (2025) Structural elucidation and environmental remediation potential of novel NiCoP@rGO nanocatalyst. Diamond and Related Materials, 154. ISSN 09259635

Ramesh, K. and Hariprasad, M.P. and Bhuvanewari, S. (2016) Digital photoelastic analysis applied to implant dentistry. Optics and Lasers in Engineering, 87. pp. 204-213. ISSN 01438166

S. Sendilvelan , M. Prabhahar, S. Sendilvelan , M. Prabhahar (2017) Pre-Stress Modal Analysis of A Centrifugal Pump Impeller forDifferent Blade Thicknesses. International Journal of Mechanical and Production Engineering Research and Development, 7 (6). pp. 507-516. ISSN 2249-6890

S. Sendilvelan et al.,, S. Sendilvelan et al., (2018) Effect of Dimethoxy-Methane (C3H8O2) Additive on Emission Characteristics of a Diesel Engine Fueled with Biodiesel. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 399-406. ISSN 2249-6890

Sampath, M. and Sankarasubramanian, K. and Archana, J. and Hayakawa, Y. and Ramamurthi, K. and Sethuraman, K. (2018) Structural, optical and photocatalytic properties of spray deposited Cu2ZnSnS4 thin films with various S/(Cu+Zn+Sn) ratio. Materials Science in Semiconductor Processing, 87. pp. 54-64. ISSN 13698001

Sangeetha Krishnamoorthi et al.,, Sangeetha Krishnamoorthi et al., (2018) Yield Characteristic of Biodiesel Derived from Used Vegetable Oil Methyl Ester (UVOME) Blended with Diesel in the Presence of Sodium Hydroxide (NaOH) and Potassium Hydroxide(KOH) Catalyst as Alternative Fuel for Diesel Engines. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 9-16. ISSN 2249-6890

Sankaran, Ganesh and Venkatesan, S. (2024) Powering Up India: Exploring the Adoption of Standardized Battery Packs in Electric Passenger Vehicles. International Journal of Vehicle Structures and Systems, 16 (2). ISSN 0975-3060

Saravanan, G. (58578900600) and Muthurajan, Kumarasamy Govindan (6507651177) and Govindarajan, Murali (58490435200) and Arunkumar, Munimathan Kumar (57200577398) (2018) A study of reversing valve performance in split type air conditioner.

Saravanan, M and Krishnamoorthi, S and Rajaram, N and Saravanakumar, M (2025) Synthesis of Nano-Hydroxyapatite from Sea Shell and Squid Bone Waste for Advanced Bone Applications via Precipitation Process. SSRG International Journal of Mechanical Engineering, 12 (9). pp. 130-138. ISSN 23488360

Saravanan, M. and Vasanth, M. and Boopathi, Sampath and Sureshkumar, M. and Haribalaji, V. (2022) Optimization of Quench Polish Quench (QPQ) Coating Process Using Taguchi Method. Key Engineering Materials, 935. pp. 83-91. ISSN 1662-9795

Sasikumar, R. and Lenin, K. (2017) Assessing the influence of hand-arm posture on mechanical responses of the human hand during drilling operation. The International Journal of Advanced Manufacturing Technology, 93 (1-4). pp. 375-384. ISSN 0268-3768

Sayed Abhudhahir, Mohammed Harshulkhan and Kandasamy, Janaki (2015) Synthesis and characterization of Manganese doped Tungsten oxide by Microwave irradiation method. Materials Science in Semiconductor Processing, 40. pp. 695-700. ISSN 13698001

Sengodan, Neelamegan and Selvaraju, Mayakannan and Venugopal, K. and Raja, T. (2025) Performance and Analysis of RCCI Combustion using Gasoline and Jatropha Curcas Biodiesel for Enhanced Efficiency and Reduced Emissions in CI Engines. International Journal of Vehicle Structures and Systems, 17 (3). 506 - 519. ISSN 09753540; 09753060

Senthil Kumar, T. and Balasubramanian, V. and Sanavullah, M.Y. (2007) Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy. Materials & Design, 28 (7). pp. 2080-2092. ISSN 02613069

Shukla, Kaustubh Kumar and Muthumanickam, T. and Sheela, T. (2022) Effects of Thermally Induced Deformations and Surface Radiosity for 3D Heat Transfer and Its Applications. Scopus. pp. 449-457. ISSN 2195-4356

Singh, Sanjay (2022) Experimental Determination of Suitability of Algae Bio Diesel Blend as an Alternate to Diesel Fuel using Cylinder Pressure Variation with Respect to Crank Angle. International Journal of Vehicle Structures and Systems, 14 (2). ISSN 0975-3060

Srinivasan, Gopi and Manickam, Anushiya and Sivakumar, Sivasakthi and Murugan, Jeevadharani and Elangomannan, Shinyjoy and Surendiran, M. (2025) A comprehensive review: surface modification strategies to enhance corrosion resistance of zirconia-based biomaterials in implant applications. Journal of Materials Science: Materials in Engineering, 20 (1). ISSN 30048958

Subramanian, Balachandran and Kumaravel, Jeeva Jothi and Rajendran, Rajiev and Duraisamy, Rajamanickam and Rajaiah, Dhilip Kumar and Sandhiran, Nagarani and Govindasamy, Rajakumar and Pandiaraj, Saravanan and Rahaman, Mostafizur and Chang, Jih-Hsing (2024) Hydrothermal fabrication of two-dimensional indium oxide nanosheets for high-performance supercapacitors. Materials Letters, 358. p. 135835. ISSN 0167577X

Thiagarajan, C. and Prabhahar, M. and Senthil, J. and Prakash, S. and Nallusamy, S. (2025) Investigation of the Performance and Emissions of a Single-Cylinder Diesel Engine Fueled with Mahua Pyro Oil Mixtures Using ETBE as an Oxygenated Additive. SSRG International Journal of Mechanical Engineering, 12 (2). 48 - 57. ISSN 23488360

Thiruchitrambalam, M. and Logesh, M. and Shanmugam, D. and Prabhahar, M. and Prakash, S. (2020) Aerodynamic Analysis of a Popular Automobile Model with Various Add-On Devices using Computational Fluid Dynamics. International Journal of Vehicle Structures and Systems, 12 (4). ISSN 0975-3060

Venkatesh, R. and Upadhyay, Viyat Varun and Chinna Ram, G. and Mohanavel, Vinayagam and Vijayan, Dhanasingh Sivalinga and Sharma, Abhishek and Soudagar, Manzoore Elahi Mohammed and Fouly, Ahmed and Seikh, Asiful Hossain (2025) Hexachloroethane fluxing mechanism and actions of hybrid fillers on functional behaviour of AZ31B alloy composites. Journal of Mechanical Science and Technology, 39 (7). 3987 - 3992. ISSN 1738494X; 19763824

Venkateshkumar, M. and Sathiyanarayanan, R. and Raghavan, R. and Kumarappan, N. and Veerappan, N. (2010) UNSPECIFIED In: 2010 2nd International Conference on Mechanical and Electrical Technology (ICMET), Singapore, Singapore.

Viswanath, R. N. and Lakshmanan, C. and Sampath Kumar, T. S. (2024) Doping effects on mechanical properties of nanoporous gold systems. Journal of Porous Materials, 31 (4). pp. 1247-1255. ISSN 1380-2224

Xu, Beibei and Chen, Diyi and Venkateshkumar, M. and Xiao, Yu and Yue, Yan and Xing, Yanqiu and Li, Peiquan (2019) Modeling a pumped storage hydropower integrated to a hybrid power system with solar-wind power and its stability analysis. Applied Energy, 248. pp. 446-462. ISSN 03062619