UNSPECIFIED (2018) Experimental Investigation on Linde-Hampson Refrigerating System Operating with Different Blends of Hydro-Carbons as Alternate Refrigerants. Journal of Applied Fluid Mechanics, 11 (SI). ISSN 17353572

Abirami, R. and Sangeetha, Sreekumar Prabha and Divahar, R. (2025) Reinforced concrete beam-column joints through sisal fiber reinforced.An integrated experimental and analytical study of enhancing cyclic behavior. Structural Concrete. ISSN 17517648; 14644177

Balachandar, B.K. and Logu, T. and Ramprasath, R. Hari and Sankarasubramanian, K. and Soundarrajan, P. and Sridharan, M. and Ramamurthi, K. and Sethuraman, K. (2020) Spray pyrolysis deposited CdO: Al films for trimethylamine sensing application. Materials Science in Semiconductor Processing, 105. p. 104753. ISSN 13698001

Balachandar, Ramalingam and Navaneethan, Rajendran and Biruntha, Muniyandi and Ashok Kumar, Krishna Kumar and Govarthanan, Muthusamy and Karmegam, Natchimuthu (2022) Antibacterial activity of silver nanoparticles phytosynthesized from Glochidion candolleanum leaves. Materials Letters, 311. p. 131572. ISSN 0167577X

Behera, Anil K. and Viswanath, R.N. and Lakshmanan, C. and Madapu, K.K. and Kamruddin, M. and Mathews, T. (2019) Synthesis, microstructure and visible luminescence properties of vertically aligned lightly doped porous silicon nanowalls. Microporous and Mesoporous Materials, 273. pp. 99-106. ISSN 13871811

Chinnakutti, Karthik Kumar and Panneerselvam, Vengatesh and Thankaraj Salammal, Shyju (2021) Impact of Cu addition on the optoelectronic properties of Zn3N2 thin films: n to p-type transitions. Materials Science and Engineering: B, 265. p. 115039. ISSN 09215107

Dcouth*, Jeswin Roy and Jaichandran, Dr. R (2019) An Adaptive Secret QR Code Message Passing Method Using Video Steganography. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 1510-1514. ISSN 22783075

Dhanaraj, K. and Adhitiyan, T. and Gubendhiran, S. and Thenpandiyan, E. and Ilaiyaraja, P. and Sagadevan, Suresh and Suresh, G. (2024) Cardiospermum halicacabum leaf extract assisted Ag and Zn doped biocompatible nanohydroxyapatite photocatalyst for efficient dye degradation from wastewater. Materials Science and Engineering: B, 308. p. 117568. ISSN 09215107

Harinarayanan, G. and Krishnan, V.K. and Natarajan, M.P. and Surender, V. and Gowthaman, J. (2022) Wear Behavior and Wear Worn Surface Analysis on Hardox Steel. Key Engineering Materials, 935. pp. 99-104. ISSN 1662-9795

Jayamalini, K. (57201704617) and Ponnavaikko, Murugesan (6701491421) (2019) Enhanced social media metrics analyzer using twitter corpus as an example.

Karthikeyan, R. and Boopathy, K. (2024) A composite strategy for designing efficient harmonic compensators in grid connected inverters with reduced power. Measurement: Sensors, 31. p. 101009. ISSN 26659174

Nallusamy, Senthilkumar and Selvaraj, Yogapriya and Ravi, Logesh and Karthikeyan, K. and Pandiaraj, Saravanan and Alodhayb, Abdullah N. and Alzahrani, Khalid E. and Eswaramoorthy, Nandhakumar and Annamalai, Selvalakshmi and Asaithambi, Sasikumar (2024) Optimizing symmetric supercapacitor performance through rational design of Zr/Cu/Fe Oxide-Modified Poly(vinyl alcohol) hybrid nanofibers. Materials Science and Engineering: B, 309. p. 117645. ISSN 09215107

Parvathy, Subramanian and Manjula, Ganesan and Balachandar, Ramalingam and Subbaiya, Ramasamy (2022) Green synthesis and characterization of cerium oxide nanoparticles from Artabotrys hexapetalus leaf extract and its antibacterial and anticancer properties. Materials Letters, 314. p. 131811. ISSN 0167577X

Pavithra, S. and Muthukannan, Dr.P. and Prabhakaran, V. (2019) An Enhanced Cryptographic Algorithm Using Bi-Modal Biometrics. International Journal of Innovative Technology and Exploring Engineering, 8 (11). pp. 2575-2582. ISSN 22783075

Prakash, S. and Boopathy, K. (2024) Hybrid MGWO- CSO optimized high gain Relift Luo converter for PV based grid tied PMBLDC drive system. Measurement: Sensors, 31. p. 101010. ISSN 26659174

Raja, S. and Babu, R. Ramesh and Ramamurthi, K. (2018) Magnetic and photocatalytic properties of bismuth doped KNbO 3 microrods. Materials Research Bulletin, 105. pp. 349-359. ISSN 00255408

Rajendran, Ranjith and Rojviroon, Orawan and Arumugam, Priyadharsan and Natchimuthu, Karmegam and Vasudevan, Vasanthakumar and Kannupaiyan, Jothimani and Muangmora, Rattana and Phouheuanghong, Phoutthideth and Rojviroon, Thammasak (2024) Design and fabrication of g-C3N4/Bi2S3 heterojunction photocatalysts for efficient organic pollutant degradation and antibacterial activity. Journal of Alloys and Compounds, 976. p. 173116. ISSN 09258388

Sampath, M. and Sankarasubramanian, K. and Archana, J. and Hayakawa, Y. and Ramamurthi, K. and Sethuraman, K. (2018) Structural, optical and photocatalytic properties of spray deposited Cu2ZnSnS4 thin films with various S/(Cu+Zn+Sn) ratio. Materials Science in Semiconductor Processing, 87. pp. 54-64. ISSN 13698001

Saravanan, G. (58578900600) and Muthurajan, Kumarasamy Govindan (6507651177) and Govindarajan, Murali (58490435200) and Arunkumar, Munimathan Kumar (57200577398) (2018) A study of reversing valve performance in split type air conditioner.

Saravanan, M. and Vasanth, M. and Boopathi, Sampath and Sureshkumar, M. and Haribalaji, V. (2022) Optimization of Quench Polish Quench (QPQ) Coating Process Using Taguchi Method. Key Engineering Materials, 935. pp. 83-91. ISSN 1662-9795

Saravanan*, B. and Vijayan, Dr.D.S. (2019) A Research on Replacement of Red-Mud in M30 Grade of Concrete. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 4177-4180. ISSN 22783075

Sayed Abhudhahir, Mohammed Harshulkhan and Kandasamy, Janaki (2015) Synthesis and characterization of Manganese doped Tungsten oxide by Microwave irradiation method. Materials Science in Semiconductor Processing, 40. pp. 695-700. ISSN 13698001

Senthil Kumar, T. and Balasubramanian, V. and Sanavullah, M.Y. (2007) Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy. Materials & Design, 28 (7). pp. 2080-2092. ISSN 02613069

Shanmugam, D. and Thirumurugan, Rama and Thiruchitrambalam, M. and Latha, C. and Maheshkumar, B (2023) Experimental investigation on the mechanical, thermal and acoustic characteristics of cellulose/synthetic fiber/nano clay hybrid composites: Influence of treatment, moisture and layering pattern. Composites Part A: Applied Science and Manufacturing, 168. p. 107497. ISSN 1359835X

Singh*, Mr. Sanjay and Prabhahar, Dr. M. and Venkatesh, Mr. R (2019) Performance and Emission Characteristics of Chlorella Algae Methyl Ester Fuelled Diesel Engine with Varying Injection Pressure. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 1710-1719. ISSN 22783075

Sona, S. and Sangeetha, Sreekumar Prabha (2025) Bacterial nano-cellulose for enhanced concrete performance: A macro-to-micro investigation unveiling its effects on the strength and durability of cementitious systems. Journal of Building Engineering, 111. ISSN 23527102

Subramanian, Balachandran and Kumaravel, Jeeva Jothi and Rajendran, Rajiev and Duraisamy, Rajamanickam and Rajaiah, Dhilip Kumar and Sandhiran, Nagarani and Govindasamy, Rajakumar and Pandiaraj, Saravanan and Rahaman, Mostafizur and Chang, Jih-Hsing (2024) Hydrothermal fabrication of two-dimensional indium oxide nanosheets for high-performance supercapacitors. Materials Letters, 358. p. 135835. ISSN 0167577X

Suguna, M. and Sathiyabama, S. (2023) Shift invariant deep convolution neural learning for resource efficient healthcare data transmission in WSN. Measurement: Sensors, 25. p. 100627. ISSN 26659174

Sunitha*, P. and Shunmuganathan, Dr. K.L. (2019) Extended Distributed Suboptimal Channel Assignment Algorithm Based Channel Assignment for Wireless Local Area Networks in a Multi Agent Environment. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 1438-1441. ISSN 22783075

sivasuriyan, Arvindan and Vijayan, D.S. (2023) Prediction of displacement in Reinforced concrete based on artificial neural networks using sensors. Measurement: Sensors, 27. p. 100764. ISSN 26659174