UNSPECIFIED (2023) Preface: 4th International e-Conference on Recent Advancement in Mechanical Engineering and Technology (ICRAMET 2021). In: UNSPECIFIED.

Abirami, R. and Subathra, P. and John, Aju M. and George, Basil and Jose, T. Akash (2023) Experimental study on treating dairy and kitchen waste water using jackfruit seed powder and peanut powder. In: UNSPECIFIED.

Aboobacker, P.A. and Ragunathan, L. and Thiyagarajan, T. and Manoharan, A. and Sasi, A.C. and Chandran, V. and Kavitha, K. and Samuel, M.S. (2023) Synthetic Biology’s Latest Trends in Antimicrobial Resistance and Biofilm. Journal of Pure and Applied Microbiology, 17 (1): 8112. ISSN 09737510; 2581690X

Arul, T. G. and Kumar, K. Vijay and Mohideen, Usman K. S. and Rexie, J. A. M. and Chitra., L. (2023) Energy management in electric vehicle using machine learning. In: UNSPECIFIED.

Arvindan, S. and Vijayan, D. S. and Manoharan, Kaarthik and Maruthachalam, D. and Kumar, R. Ranjith (2023) Damage assessment and health monitoring of timber structures using SHM techniques. In: UNSPECIFIED.

Ashokkumar, S. and Kalyanakumar, S. and Sudalai, K. Chembalai and Gajendrean, E. and Reddy, N. Jagan Mohan (2023) Experimental investigation and performance analysis of an electric green bicycle as a measure of zero emission. In: UNSPECIFIED.

Ashokkumar, S. and Surendrababu, K. and Lokesh, S. and Balaji, S. and Rathinasamy, Kishore (2023) Study of size effect of reinforcement and mechanical properties of Al-SiC composite. In: UNSPECIFIED.

Babu, B. Selva and Sathiyaraj, S. and Varun, P. and Thomas, Alan and Vivek, V. (2023) An experimental analysis and optimization of machining rate & surface characteristics in WEDM of phosphor bronze using Taguchi's method. In: UNSPECIFIED.

Balasubramanian, Arul and Sivasankari, V and Madhan, Lakshmana and Kathiravan, Sathiyendran and Ramalingam, Kothai and Manivannan, Ekambaram and Choudhary, Arbind Kumar (2023) Multimodal neuroprotection by Terminalia chebula fruit extract against haloperidol-induced neurotoxicity in rats. International Journal of Experimental Research and Review, 32. pp. 59-69. ISSN 2455-4855

Bindhu., P. and Suresh, G. R. and Rajalakshmi, S. and Selvi, C. and Prakash, S. (2023) Detection in dermoscopic images with inadequate control of blue-white structures. In: UNSPECIFIED.

Bubeshkumar, D. and Elanthiraiyan, A. and Balaji, K. and Surya, M. Deva (2023) Finite element analysis of electric three wheeler vehicle. In: UNSPECIFIED.

Elango, S. and Manjunath, L. and Prasad, D. and Sheela, T. and Ramachandran, G. and Selvaraju, S. (2023) Super Artificial Intelligence Medical Healthcare Services and Smart Wearable System based on IoT for Remote Health Monitoring. In: UNSPECIFIED.

Elanthiraiyan, A and Kumar, S Ashok and Adarsh, A C and Akshay, P P and Akshay, S (2023) Wear analysis of TiAlN coated carbide tool in lathe. In: UNSPECIFIED.

Elanthiraiyan, A. and Kumar, S. Ashok and Dhinesh, S. and Vence V., Aldo and Jebin C., Donic (2023) Mechanical evolution of sisal and sugarcane fibres reinforced composites. In: UNSPECIFIED.

Epsiba, P. and Gopi, B. and Umapathy, K. and Solainayagi, P. and Sivanantham, E. and Kumar, S. Mohan (2023) Prognosis and prediction of disease using hybrid machine learning framework. In: UNSPECIFIED.

Gautam, Deepan and Dolma, Karma Gurmey and Khandelwal, Bidita and Gupta, Madhu and Singh, Meghna and Mahboob, Tooba and Teotia, Anil and Thota, Prasad and Bhattacharya, Jaydeep and Goyal, Ramesh and M.R. Oliveira, Sonia and Pereira, Maria de Lourdes and Wiart, Christophe and Wilairatana, Polrat and Eawsakul, Komgrit and Rahmatullah, Mohammed and Saravanabhavan, Shanmuga Sundar and Nissapatorn, Veeranoot (2023) Green synthesis of silver nanoparticles using Ocimum sanctum Linn. and its antibacterial activity against multidrug resistant Acinetobacter baumannii. PeerJ, 11. e15590. ISSN 2167-8359

Gopi, B. and Kumar, D. Sathish and Velmurugan, S. and Elumalai, G. and Boopathy, K. (2023) Wireless networks in providing extraordinary quality of experience for camera consumers. In: UNSPECIFIED.

Imthiyas, A. and Kumar, S. Kalyana and Krishna, B. Aravind and Robinson, G. and Suriya S. (2023) Experimental investigation on surface roughness of aluminum alloy 6063 machining with minimum quantity lubricant. In: UNSPECIFIED.

Jagadeesan, J. and D., Subashree and Kirupanithi, D. Nancy (2023) An Optimized Ensemble Support Vector Machine-Based Extreme Learning Model for Real-Time Big Data Analytics and Disaster Prediction. Cognitive Computation, 15 (6). pp. 2152-2174. ISSN 1866-9956

Jayaseelan, G. Antony Casmir and Surenderpaul, A. and Selvam, T. Thandial and Anderson, A. and Senthilkumar, A. and Malladi, Avinash and Venkatesh, R. and Aneesh, V. N. and Saravanan, R. (2023) Assessment of solar thermal monitoring of heat pump by using zeolite, silica gel, and alumina nanofluid. Clean Technologies and Environmental Policy, 25 (9). pp. 3075-3083. ISSN 1618-954X

Jayaseelan, G. Antony Casmir and Thiruchitrambalam, M. and Joseph, Judeson and Mathew, Bince and Subramani (2023) Study of various nano particle additives and its impact in CI engine. In: UNSPECIFIED.

Kademani, S.P. and Nelaturi, P. and Sathyasagar, K. and Ravikumar, R. (2023) Noncoding RNAs associated with IgA nephropathy. Journal of Nephrology, 36 (3). pp. 911-923. ISSN 17246059; 11218428

Kalyanakumar, S. and Elanthiraiyan, A. and Sreekanth, S. and John, Shijo and Afsal, K. E. (2023) Process optimization of parameters for minimizing vibrations and surface roughness during hard steel by ranking algorithm. In: UNSPECIFIED.

Kalyanakumar, S. and Prabhu, L. and Kabir, Ashik M. (2023) Experimental investigation on thermal assisted machining process of mild steel using CBN tools. In: UNSPECIFIED.

Kalyanakumar, S. and Thiagarajan C. and Vishnu V. and Nair, Sreeju S. and Varghese, Willium Mathew (2023) Analysis of process parameter in cylindrical grinding using multi objective optimizaton of hot work steels. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Prabhahar, M. and Hassan, Shazzat Ali Mohammed and Imam, Fazil and Ahmad, Faizan (2023) Design and analysis of a gas turbine blade by using FEM. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Prabhu L. and Kannan, Hithul and Pradhyoth Y. S. and Thiruvarangan M. (2023) Design & deployment of surveillance bot using Raspberry Pi & IoT. In: UNSPECIFIED.

Kumar, K Naveen and Divahar, R and Gupta, Mohit and Raj, P S Aravind and Sangeetha, S P and Joanna, P S (2023) Elimination of global warming gas emissions by utilizing high reactive metakaolin in high strength concrete for eco-friendly protection. Materials Research Express, 10 (8). 085507. ISSN 2053-1591

Kumar, M. Saravana and Prakash, S. and Kumaraguru, R. and Rasheed, Ahsen and Kalayath, Yasir Husain (2023) Effect of methanol and lemon grass biodiesel in a compression ignition engine. In: UNSPECIFIED.

Kumaran, P. and Natarajan, S. and Kumar, A. R. Sarath and Jayaraj, T. V. Varun and kumar, Akhil A. (2023) Investigation of emission control on VCR diesel engine with additive and turbocharger using algae biodiesel. In: UNSPECIFIED.

Kumaran, P. and Praveen R. and Sreerang K. U. and Prabhuraj M. S. and Iraianbu C. (2023) Experimental investigation on wire-electro discharge machining of titanium grade 9 using RSM-central composite design. In: UNSPECIFIED.

Kumaran, P. and Senthilkumar, A. and Jagadees, Aravind and Kuriakose, Amal and Ravindran, Aswanth (2023) Implementation of sustainable sewage cleaning system for promoting an eco-friendly environment. In: UNSPECIFIED.

Kumaran, P. and Senthilkumar, A. and Robinson, Roshan and Reddy, Naveen Kumar and Lokesh S. (2023) Design and fabrication of hybrid screw pump for fluidics. In: UNSPECIFIED.

Kuppusamy, Surendrababu and Muthuswamy, Prabhahar and Kumarasamy, Muthurajan and Subramanian, Sendilvelan (2023) Analysis of the Emissions and Performance of a Diesel Engine Using Pumpkin Seed Oil Methyl Ester with Different Injection Pressures. Fluid Dynamics & Materials Processing, 19 (4). pp. 1003-1014. ISSN 1555-2578

Mahesh, R. and Vijayakumar, K. and Harish, R. and Prakash, V. Arun and Karthik, R. (2023) Emission analysis of yellow oleander seed biodiesel in variable compression ratio engine. In: UNSPECIFIED.

Mahesh, R. and Vijayakumar, K. and Shanty, Hansal and Ambadan, Elroy G. and Aseem, S. (2023) Investigation of emission characteristic of coriander seed biodiesel in VCR engine at various compression ratios. In: UNSPECIFIED.

Majo, Irene and Manovijay, B. and Jacob, Mathew and Rajathi, P. and Fenn, Saramma Mathew and Ravi, Saranyan (2023) A pilot study on the comparative evaluation of residual periodontal ligament in extracted teeth of chronic periodontitis patients with and without type 2 diabetes – Vital function of an occult dimension. Journal of Indian Society of Periodontology, 27 (5). pp. 492-495. ISSN 0972-124X

Michael, B. Samuvel and Saravanakumar, M. and Jebaz M., Sam and Ajith K. and Reang, Marjin (2023) Design and fabrication of FMS based line follower guided vehicle. In: UNSPECIFIED.

Murthy, S. Murugeswari and Vanathi, A. and Kalaiyarasi, D. and Usha, S. and Saranya, D. (2023) Deep in memory architectures learning of Trade-Offs for productivity. In: UNSPECIFIED.

Pallepogula, Dinesh R. and Adhisivam, B and Dorairajan, Gowri and Ballambattu, Vishnu B. and Saya, Ganesh K. (2023) Adverse Neonatal Outcomes and Associated Antenatal Risk Factors – A Matched Case-Control Study from a Tertiary Care Hospital, South India. Indian Journal of Community Medicine, 48 (1). pp. 126-130. ISSN 0970-0218

Parvez, Rehnuma and Vijayachari, Paluru and Saha, Mrinmoy Kumar and Biswas, Lipika and Ramasamy, Jawahar and Vins, Alwin and Beniwal, Nisha and Vasanthi, S. and Ramadoss, Sasikala and Kaur, Harpreet and Nagarajan, Muruganandam (2023) Distribution of Human Papillomavirus Genotypes among the Women of South Andaman Island, India. Diagnostics, 13 (17). p. 2765. ISSN 2075-4418

Parvez, Rehnuma and Vins, Alwin and Radhakrishnan, Varadharajaperumal and Beniwal, Nisha and Biswas, Lipika and Thankachan, Nithu and Kaur, Harpreet and Muruganandam, Nagarajan (2023) Trichomonas vaginalis infection among married women of Andaman and Nicobar islands. Infectious Diseases, 55 (12). pp. 874-879. ISSN 2374-4235

Prabhahar, M. and Prakash, S. and Raju, Richu and Mathew, Robin and Sha N., Nabin (2023) Evaluation and optimization using Taguchi methodology for fuel injection strategies of pongamia methyl ester as fuel. In: UNSPECIFIED.

Prabhakar, S. and Ravikrishnan, Ganesh Bharathi and Prabhu, L. (2023) Investigation of emission characteristics for Cu/ZSM-5 SCR catalyst in the DI-diesel engine. In: UNSPECIFIED.

Prabhu, L. and Saravanan, R. and Anderson, A. and Senthilkumar, A. and Aneesh, V. N. and Malladi, Avinash and Krishnan, A. Mohana and Majora, Manaye and Barik, Debabrata (2023) Synthesis, Thermal Adsorption, and Energy Storage Calibration of Polysulfone Nanocomposite Developed with GNP/CNT Nanofillers. Adsorption Science & Technology, 2023. ISSN 0263-6174

Prabhu, Loganathan and Kumar, Shanmugam Satish and Krishnamoorthi, Sangeetha and Anderson, Arul Gnana Dhas and Jawahar, Raj (2023) Effect of novel tool path pattern on mechanical properties of friction stir welded AA6061 alloy. Applied Nanoscience, 13 (3). pp. 2129-2138. ISSN 2190-5509

Praveen R. and Kumaran, P. and Anandu S. and Gokulprasath S., Gnana and Karthickraja N. (2023) Aerodynamic and flow optimization in turbo charger nozzle using ansys CFX. In: UNSPECIFIED.

Raja, R. and Rao, Gundala Srinivasa and Duraipandy, P. and Mathan, K. and Chitra, L. (2023) Wind energy system based bidirectional converter with energy storage system. In: UNSPECIFIED.

Rajaprakash, S. and Muthuselvan, S. and Jaichandaran, R. and Sai Nithankumar, M. and Sai Rathankumar, M. and Gupta, Vishal Kumar (2023) The Security Algorithm ES-BR22-001 Used to Secure the Health Data. Scopus, 579. pp. 549-557. ISSN 2367-3370

Ramani, R. and Meenakshi, T. and Vanitha, N. Suthanthira and Karthikeyan, A. and Sujatha, S. (2023) IoT-Integrated Wearable Skin Sensors for UV Exposure Monitoring and Sun Protection. In: UNSPECIFIED.

Ramasubramani, Premkumar and Krishnamoorthy, Yuvaraj and Vijayakumar, Karthiga and Rushender, Rajan (2023) Burden, trend and determinants of various forms of domestic violence among reproductive age-group women in India: findings from nationally representative surveys. Journal of Public Health, 46 (1). e1-e14. ISSN 1741-3842

Ravikrishnan, Ganesh Bharathi and Venkatesan, S. and Prabhakar, S. (2023) Extensive analysis of performance and emission characteristics for progressive biodiesel blend ratios using tamarind seed biodiesel with petroleum diesel in compression ignition engine. In: UNSPECIFIED.

Roy, Anitha and Neelakantappa, Vasantha Mallenahalli and Ganesan, Jayashree and Ramajayam Asokan, Balakrishnan and Kulandaivel, Srinivasan and Uddandrao, V. V. Sathibabu and Singaravel, Sengottuvelu (2023) Beta-glucan protects against isoproterenol-induced cardiac remodeling by regulating the ACE-AT1R axis and attenuates cardiac inflammation and apoptosis. Asian Pacific Journal of Tropical Biomedicine, 13 (9). pp. 384-392. ISSN 2221-1691

Sankaran, Ganesh and Venkatesan, S. (2023) Role of standardized battery pack geometry in electric vehicles design. In: UNSPECIFIED.

Saravanan, M. and Jayaseelan, Antony Casmir and Sourab V. and Sourav P. V. and Rakesh Babu R. (2023) Experimental investigation of hybrid composite material for AQUA silencers. In: UNSPECIFIED.

Saravanan, M. and Praveen R. and Kumar, Akhil A. and Prabha, Amal and Jacob, Akhil Job (2023) Performance enhancement of heat exchanger using aluminium nano fluids. In: UNSPECIFIED.

Sathiyaraj, S and Mahesh, R and Ahamed, Arshid and Harikrishnan, P and Sudhan K., Hari Hara (2023) Process optimization and production improvement of injection moulding by wire brush buffing process. In: UNSPECIFIED.

Sathiyaraj, S. and Samuvel, B. Michael and Ameer, Mishal and Marwan N., Mohammed and Naseef PK, Mohammed (2023) Design and fabrication of welding machine with magnetically impelled arc butt (MIAB). In: UNSPECIFIED.

Sathiyaraj, S. and Selvababu, B. and Richard E., Antony and Varghese, Abin Chacko and Vijay P., Arun (2023) Design and fabrication of fixture for automation in cover plate assembly process. In: UNSPECIFIED.

Sathiyaraj S. and Krishnamoorthi, Sangeetha and Vyshakh M. and Kumar P. S., Akshay and Aswin K. (2023) Automation in pneumatic oil dipping mechanism with two hand operation and fully advanced confirmation arrangements to enable safety and quality. In: UNSPECIFIED.

Senthil, J. and Prabhahar, M. and Vijay, Sri Garhil and Shriyan, Manoj G. and Hareesh P. (2023) Experimental investigation and optimization using Taguchi method and shorea biodiesel on VCR engine. In: UNSPECIFIED.

Senthilkumar, A. and Anderson, A. and Arunkumar, G. and Prakash S., Surya and Raj K., Nishanth (2023) Improving the R600a vapour compression refrigeration system’s energy efficiency employing graphene oxide nanoparticles to retrofit R134a refrigerator using fuzzy logic prediction. In: UNSPECIFIED.

Shivakumar N. and Vijayakumar K. and Surendran, Akshay and Jose, Chris and Mahmood V. K., Safa (2023) Impact of blended fuels with split injections on combustion and emission characteristics of spray guided mode modified GDI engine. In: UNSPECIFIED.

Sivanantham, E. and Epsiba, P. and Gopi, B. and Solainayagi, P and Umapathy, K. and Kumar, S. Mohan (2023) Mammogram classification using VGG-16 architecture. In: UNSPECIFIED.

Sundhari, Guna and Babu, D. Vijendra (2023) Embedded and machine learning based flood monitoring system using IoT. In: UNSPECIFIED.

SurendraBabu, K. and YogaVignesh, V. and Nagalakshmi, R. and Prakash, S. (2023) Investigation of corrosion and surface morphological behaviour of hydroxyapatite coated surgical stainless-steel using electrodeposition process. In: UNSPECIFIED.

Thiagarajan, C and Sheryashan and Surendrababu, K. (2023) Design and analysis of seat & seat frames - Cost and weight optimization. In: UNSPECIFIED.

Thiagarajan, C. and Mahesh R. and Marray, Pe Eshaq and Imdadulla M., Mohammed and Nabeel, Mohamed (2023) Analysis of delamination failure in banana-coir fiber reinforced PLA matrix composites through Taguchi optimization technique. In: UNSPECIFIED.

Thiagarajan, C. and Senthil, J. and Prabhahar, M. and Sindhuraj S. and Natarajan R. and Vasanth G. (2023) Experimental investigation and parameter influence on VCR engine using Jojoba biodiesel fuel. In: UNSPECIFIED.

Varghese, M. P. and Muthumanickam, T. (2023) Early detection of analog circuit performance using RBF. In: UNSPECIFIED.

Veena, Vijay Kumar and Harikrishnan, Adhikesavan and Maheswari, Purushothaman (2023) Velvet Shank (Flammulina velutipes). Scopus. pp. 153-169.

Velumayil, Ramesh and Seikh, Asiful and Balasubramanian, Vedagiri and Kalam, Md. and Ravishankar, Sathyamurthy and Venugopal, Jayaprakash and Chitra, Lakshmikanthan and Saravanakumar, Lakshmanasamy and Senthilkumar, T.S. (2023) Performance enhancement of water output via latent heat storage system with single slope solar stills. Thermal Science, 27 (6 Part). pp. 4851-4860. ISSN 0354-9836

Venkataesan Kumari, Bhuvaneshwari and Mani, Renuka and Asokan, Balakrishnan Ramajayam and Balakrishnan, Karthikeyan and Ramasamy, Arulmani and Parthasarathi, Rengasamy and Kandasamy, Chitra and Govindaraj, Rubalakshmi and Vijayakumar, Natesan and Vijayakumar, Sekar (2023) Green Synthesised Silver Nanoparticles Using Anoectochilus elatus Leaf Extract: Characterisation and Evaluation of Antioxidant, Anti-Inflammatory, Antidiabetic, and Antimicrobial Activities. Journal of Composites Science, 7 (11). p. 453. ISSN 2504-477X

Vijayakumar, K. and Kumar, D. Bubesh and Kumar, Aravind S. and Daniel, Ashish and Haripal, J. L. (2023) Design and fabrication of Exoskeleton robotic arm. In: UNSPECIFIED.

Vijayakumar, K. and Thiruchitrambalam, M. and Arshid Pk, Muhammed and Shihad P., Muhammed and Rahman, Sohaib S. (2023) Evaluation of mechanical properties of alkaline treated natural fiber PMC. In: UNSPECIFIED.

Yuvaraj, T. and Devabalaji, K. R. and Suresh, T. D. and Prabaharan, Natarajan and Ueda, Soichiro and Senjyu, Tomonobu (2023) Enhancing Indian Practical Distribution System Resilience Through Microgrid Formation and Integration of Distributed Energy Resources Considering Battery Electric Vehicle. IEEE Access, 11. pp. 133521-133539. ISSN 2169-3536