Antony Casmir Jayaseelan, G. and Samuvel Michael, B. and Elanthiraiyan, A. and Arun Kumar, M. N. and Mohammed Iqbal, N. (2025) Effect oF Cu2O Nanoparticle in Candlenut Biodiesel Blends in CI Engine. Springer, 79. pp. 355-362. ISSN 2662-3161

Antony Casmir Jayaseelan, G. and Samuvel Michael, B. and Subathra, M. and Vinoth, K. and Babu, T. (2025) Effect of Dual Biodiesel Blends with Ethanol as Additives in CI Engine. Advancements in Materials Processing Technology, Volume 3 (AMPT 2023), 79. pp. 157-165. ISSN 2662-3161

Ashokkumar, S. and Natarajan, S. and Prabhahar, M. and Sivabalan, M. and Ravichandran, G. (2025) A Comparative Analysis of Heat Transfer in Elliptical and Straight Slot Cross-Sectional Spiral Pipes at Varying Fluid Velocities Using CFD Methodology Toward Efficiency. Springer, 79. pp. 363-372. ISSN 2662-3161

Ashokkumar, S. and Prabhahar, M. and Arvind, S. and Dhanasekar, S. (2025) Finite Element Analysis of Hybrid Helical Gear Models with Carbon Fiber-Reinforced Polymer Composite for Weight Reduction. Springer, 79. pp. 167-178. ISSN 2662-3161

Balsingh, Samuvel Michael and Krishnamoorthi, Sangeetha and Prakash, S. and Babu, J. M. (2025) Analysis of Performance, Combustion Dynamics and Emission Profiles of a VCR Multi-Fuel Engine with Ethanol-Plastic Oil Blend. International Journal of Vehicle Structures and Systems, 17 (1). 1 - 9. ISSN 09753540; 09753060

Dhilipkumar, Thulasidhas and Sadeq, Abdellatif Mohammad and Shankar, Karthik V. and Murali, Arun Prasad and Karuppusamy, P. and K, Selvakumar and Giri, Jayant P. and Sabeur, Hassen (2025) Performance evaluation of dual-scale strengthened co-bonded single-lap joints using carbon nanotubes and Z-pins with ANN. Nanotechnology Reviews, 14 (1). ISSN 21919097; 21919089

Gokulraj, S. and Saravanan, K. G. and Vijayakumar, K. and Arunkumar, K. (2025) Thermo-mechanical and mechanical performance of interlaced glass fiber epoxy hybrid composites reinforced with almond biochar biofiller. Journal of Polymer Research, 32 (5). ISSN 10229760; 15728935

Hariram, Venkatesan and R, Sathishbabu and Godwin John, J. and Kailiappan, Nandagopal and Vijayakumar, K. and E, Sangeeth Kumar and K, Kamakshi Priya (2025) Enhanced combustion and emission characteristics of diesel-algae biodiesel-hydrogen blends in a single-cylinder diesel engine. Results in Engineering, 26. ISSN 25901230

Imthiyas, A. and MUSTHAFA, B. and Ashish, K. and Gobind, M. (2025) Prediction Model by Adaptive Neuro-Fuzzy Inference System of R600A Vapour Compression Refrigeration System Using Al2O3/TiO2 Composite Nanolubricants. Russian Journal of Physical Chemistry B, 19 (4). 953 - 960. ISSN 19907931; 19907923

Imthiyas, A. and Sathiyaraj, S. and Silambarasan, R. and Ramkumar, V. (2025) Preparation and Mechanical Characterization of TiC Particles Reinforced Al6061 Alloy Composites. Springer, 79. pp. 337-344. ISSN 2662-3161

J. Allen, Jeffrey and S., Govindaraj and R., Mahesh and A., Bhaskar and K., Arunkumar and R. Edwin, Joseph and V., Hariram and V., Punitharaj and S., Sarathipriyan (2025) Influence of Fe2O3 Nanoparticle-infused Waste Cooking Oil Biodiesel on the Emission, Performance, and Combustion Aspects towards a Cleaner Environment. Journal of Environmental Nanotechnology, 14 (3). pp. 466-476. ISSN 2279-0748

K, Surendra Babu and S, Prakash and Satapathy, Lingaraja and S, Muhammathu Muhsin and M, Nirmal Kumar (2025) FDM Process Using Prediction of Mechanical Properties of Borophene-Reinforced Polymer Nanocomposites. Journal of Advanced Manufacturing Systems. pp. 1-20. ISSN 0219-6867

Kalyanakumar, S. and Natarajan, S. and Prabhahar, M. and Saravanakumar, Manickam Puratchiveeran and Sudhakaran, P. and Suresh, Nidhin (2025) TRUST-Based Optimization of High-Performance Machining Process Parameters of Aluminum for Enhanced Product Quality in Automotive Manufacturing. International Journal of Vehicle Structures and Systems, 17 (1). 104 - 114. ISSN 09753540; 09753060

Kalyanakumar, S. and Sengodan, Natarajan and Jeyaseelan, Antony Casmir and Sundaran, Abijith and Nair, Karthik Raveendran (2025) Optimizing face milling parameters for high-speed machining of AA6061 aluminum alloy: A central composite design approach for enhanced performance. In: Optimizing face milling parameters for high-speed machining of AA6061 aluminum alloy: A central composite design approach for enhanced performance.

Krishnamoorthi, Sangeetha and Ayyappan, A. and Sathiya, Agin and SriKumar, A (2025) Enhancing Thermal and Combustibility Properties of Glass Fibre Reinforced Composites: A Comparative Study of Synthetic and Castor Oil-Based Bio-Epoxy. Springer, 79. pp. 191-202. ISSN 2662-3161

Krishnamoorthi, Sangeetha and L, Prabhu and M, Prabhahar and Mehaboob, Adil and Abdulla, Adil (2025) Optimization of biodiesel production from jatropha oil and its impact on engine performance and emissions using response surface methodology. Environmental Research and Technology, 8 (2). pp. 328-344. ISSN 2636-8498

Krishnamoorthi, Sangeetha and Prabhu, L. and Rahil, Md. and Nagasai, Kollimarla and Faim, Md. (2025) Experimental Investigation of Diesel Engine Using Chlorella Algae-Acetylene by Dual Fuel Mode. Springer, 79. pp. 69-79. ISSN 2662-3161

Krishnamoorthi, Sangeetha and Thiagarajan, C. and Prabhahar, M. and Raghunathan, Anandhu K. and Deepak, P. V. (2025) Performance and Emission Characteristics of Soapnut Methyl Esters-Diesel Blends Between VCR and Tata Zip XL Engine. Springer Proceedings in Materials, 79. pp. 251-261. ISSN 2662-3161

Kumaran, P. and Sathiyaraj, S. and Selva Babu, B. and Yogeswar, S. and Murugan, T. (2025) Design and Analysis of Hybrid Sandwich Layered Industrial Safety Helmet. Springer, 79. pp. 317-328. ISSN 2662-3161

MUSTHAFA, B. and Prabhahar, M. (2025) Experimental and numerical analysis of performance and emission characteristics of CI engine using Juliflora-Gulmohar biodiesel/blends and ANN prediction using MATLAB. Case Studies in Thermal Engineering, 72. ISSN 2214157X

Manibalan, Vimalraj and Ramani, Dhanesh and Bhat, Prajna J. (2025) Audiological profile of fishermen using fiber motor boats in Puducherry. International Maritime Health, 76 (1). 21 - 27. ISSN 16419251; 20813252

Muruganandam, Vignesh and Savery, Nishanth and Sakthignanavel, Arulmozhi (2025) Comparing the Efficacy of Fentanyl Nasal Packing on Postoperative Pain in Patients Undergoing Nasal Surgeries Versus Normal Saline PackâA Randomized Control Trial. Indian Journal of Otolaryngology and Head and Neck Surgery, 77 (1). 265 - 270. ISSN 09737707; 22313796

Parthiban, D. and Vijayan, D. S. and Arunachalam, S. and Kumar, Himanshu and Kumar, Bitu and Kumar, S. Naveen and Sankaran, Naveen (2025) Synergic Effect of Cashew Nutshell Ash as Partially Replaced Binding Material in Cement Concrete- an Experimental Study. Springer, 79. pp. 395-407. ISSN 2662-3161

Prabhahar, M. and Prakash, S. and Boobesh Kumar, P. and Kalidhasan, B. (2025) Enhanced Performance and Emission Characteristics of Soybean Biodiesel using TiO2 Nanoparticles in CRDI Engines: A Comprehensive Analysis. International Research Journal of Multidisciplinary Technovation, 7 (1). 203 - 218. ISSN 25821040

Prabhahar, M. and Prakash, S. and Dharsan, P. and Elumalai, P. V. and Xueyi, Fang and Hasan, Nasim (2025) Optimization of thermal barrier coating with induced copper oxide nanoparticles in CI engine using algae methyl ester as fuel. Scientific Reports, 15 (1). ISSN 20452322

Prabhahar, M. and Prakash, S. and Karpaga Vinayagam, B. and Dhanraj, T. and Zhang, Huaizhi (2025) Investigating the Impact of Oxygenated Additives (DEE, DME & MTBE) on Engine Performance and Emission Reductions in Simarouba Methyl Ester Blends. International Research Journal of Multidisciplinary Technovation, 7 (3). 112 - 123. ISSN 25821040

Prakash, S. and Prabhahar, M. and Kumar, M. Saravana and Tholkappiyan, K. and Aravind, S. (2025) CFD Simulation of Heat Transfer Analysis—Thermal Effect of Phase Change Materials in Buildings. Springer, 79. pp. 93-102. ISSN 2662-3161

Raja, M. Esakki and Sivalakshmi, Sivanathan and Balusamy, Thangavel and MUSTHAFA, B. and Sudharshan, M. and Goyal, Ashish and Bhowmik, Abhijit (2025) Experimental investigation on thermal performance of polyurethane foam mattresses with PCM. Discover Applied Sciences, 7 (5). ISSN 30049261

Rajasekaran, M and Krishnamoorthi, S and Vijayaragavan, M (2025) Experimental investigation of diethyl ether (DEE) blended jack fruit peel oil (JFP) with hydrogen as a secondary fuel in dual-fuel compression ignition engines. Environmental Science and Pollution Research, 32 (42). pp. 23810-23819. ISSN 09441344; 16147499

Rajasekaran, Mahesh and Krishnamoorthi, Sangeetha and Ganesh, P. Ravichandra and Vijayakumar, A. and Yugendran, S. (2025) Synergistic Enhancement of Diesel Engine Performance and Emissions through Jackfruit Peel Biodiesel Blends: An Experimental Investigation. International Journal of Vehicle Structures and Systems, 17 (1). 79 - 83. ISSN 09753540; 09753060

S. Balakrishnan and N.S. Simonthomas and J. Nithyashri and B. Suchitra and G. Umamaheswari and D. Pradeep (2025) Automated Diagnosis of Cancer Disease with Human Tissues using Haralick Texture Features and Deep Learning Techniques. International Journal of Computational and Experimental Science and Engineering, 11 (1). ISSN 2149-9144

Saravana Kumar, M. and Prabhahar, M. and Prakash, S. and Hari Krishnan, H. R. and Vijay, B. (2025) Improvement of a Battery Pack Enclosure Fabricated from a Polymer Composite Material for Electric Vehicles. Springer, 79. pp. 287-296. ISSN 2662-3161

Saravanan, M and Krishnamoorthi, S and Rajaram, N and Saravanakumar, M (2025) Synthesis of Nano-Hydroxyapatite from Sea Shell and Squid Bone Waste for Advanced Bone Applications via Precipitation Process. SSRG International Journal of Mechanical Engineering, 12 (9). pp. 130-138. ISSN 23488360

Sathiyaraj, S. and Sendrayan, Venkatesan and Kumaran, P. and Balashanmuganathan, Selva Babu (2025) Optimization of Wear Behaviour of Al6061 Metal Matrix Composites Using Taguchi Approach. Turkish Journal of Engineering, 9 (1). 56 - 63. ISSN 25871366

Sathiyaraj, S. and Sendrayan, Venkatesan and Kumaran, P. and Prabhakaran, Balaji and Sourav Sreejith, K. M. (2025) Examining the Mechanical Properties of Al-SiC Metal Matrix Composites Produced Using the Stir Casting Method. Turkish Journal of Engineering, 9 (1). 21 - 27. ISSN 25871366

Selva Babu, B. and Bubesh Kumar, D. and Prabhu, L. and Sudhir Kumar Yadav, K. (2025) Microstructural Behaviour of Spark Plasma Sintered Carbon Nanotube + Ti6Al4V Nanocomposites. Springer, 79. pp. 435-442. ISSN 2662-3161

Selva Babu, B. and Sathiyaraj, S. and Balaguru, G. and Nambu Selvam, S. (2025) Tool Condition Monitoring of Friction Stir Welding—A Machine Learning Approach. Science Talks, 79. pp. 243-250. ISSN 27725693

Senthil, J. and Prabhahar, M. and Thiagarajan, C. and Nallusamy, S. and Prakash, S. (2025) Effect of Metal Oxide Nano Liquid on Diesel/Plastic Oil Mixture Diesel Engine Performance. International Journal of Engineering Trends and Technology, 73 (2). 166 - 176. ISSN 23490918; 22315381

Senthilkumar, A. and Selva Babu, B. and Pramanik, Manoj Kumar and Dubey, Nitiyanand (2025) Experimental Data and R600a Vapor Refrigerator Prediction Employing Al2O3/SiO2 Nanolubricants Adopting Adaptive Neuro-fuzzy Inference System Model. Predicting R600a Vapor Refrigerator Performance Using ANFIS with Al₂O₃/SiO₂ Nanolubricants, 79. pp. 139-146. ISSN 2662-3161

Srinivasan, S. A. and MUSTHAFA, B. and Naidu, B. Vishnu Vardhana and Sunil Kumar, M. (2025) Optimization and experimental investigation on CI engine characteristics fuelled with low carbon alcohols and juliflora biodiesel blends: A RSM approach. Fuel, 388. ISSN 00162361

Thiagarajan, C. and Krishnamoorthi, Sangeetha and Adithyan, P. and Ajmal, P. A. and Adwaith, M. P. (2025) Optimization and Tribological Behaviour of Stir Cast Aluminium MMC’s by Taguchi Method. Springer, 79. pp. 33-47. ISSN 2662-3161

Thiagarajan, C. and Prabhahar, M. and Senthil, J. and Prakash, S. and Nallusamy, S. (2025) Investigation of the Performance and Emissions of a Single-Cylinder Diesel Engine Fueled with Mahua Pyro Oil Mixtures Using ETBE as an Oxygenated Additive. SSRG International Journal of Mechanical Engineering, 12 (2). 48 - 57. ISSN 23488360

Thiagarajan, C. and Prabhahar, M. and Senthil, J. and Vignesh, G. and Kumar, Suresh (2025) Efficient Biodiesel Production from Mahua Seed Oil Using Acid and Base-Catalysed Transesterification: Process Optimization and Quality Assessment. Advancements in Materials Processing Technology, Volume 3 (AMPT 2023), 79. pp. 213-223. ISSN 2662-3161

Vijayakumar, K. (2025) Maximizing the combustion phenomenon with reduced emission of a compression ignition engine fulled with Dunaliella salina biodiesel and hydrogen blends. Scientific Reports, 15 (1). ISSN 20452322

Vijayakumar, K. and Bubesh Kumar, D. and Parida, Sanjaya Kumar and Behera, Tutu (2025) Design and Development of an Upper Limb Exoskeleton with EMG Sensor-Based Control. Springer, 79. pp. 297-305. ISSN 2662-3161

ntony Casmir Jayaseelan, G,A,C and Ashim, M.A.P and Srinivas, S and Rajendran, P (2025) Experimental Investigation and Central Composite Design Modeling Optimization of Dual Biodiesel Mixture in CI Engine Parameters. Russian Journal of Physical Chemistry B, 19 (4). pp. 953-960. ISSN 19907931; 19907923