Anil Kumar, K.V. and Kavitha, S. and Sreekanth, K.S. (2021) Regulatory proteins in placental angiogenesis. Biomedicine (India), 41 (4). pp. 694-700. ISSN 9702067

Antony Casmir Jayaseelan, G. and Anderson, A. and Poduva, Murali Krishnan and Sudheesh, P.V. and Roshith (2021) Synthesis and performances characteristics of biodiesel from animal fat. Materials Today: Proceedings, 45. pp. 6053-6056. ISSN 22147853

Behera, Anil Kumar and Viswanath, Raghavan Nadar and Manovah David, T. and Prasad, Arun K. and Ajikumar, Puthuparampil K. and Mathews, Tom (2021) Hydrogen sensing behaviour of platinum and palladium functionalized silicon nanowalls. Applied Physics A, 127 (1). ISSN 0947-8396

Bhaskar, K and Sassykova, L.R. and Prabhahar, M. and Percis, E. Sheeba and Nalini, A. and Jenish, T. and Jayarajan, J. and Jayabalakrishnan, D. and Sendilvelan, S. and Krishnamoorthi, Sangeetha (2021) Resistance Heated Catalytic Converter (RHCC) with copper oxide catalyst for reducing HC/CO emission from automobile. Materials Today: Proceedings, 45. pp. 5868-5872. ISSN 22147853

Bhaskar, K. and Sassykova, L.R. and Prabhahar, M. and Kiani Deh Kiani, M. and Gomathi, K. and Sendilvelan, S. (2021) Oxides of nitrogen and soot trade-off characteristics of methyl esters in a hybrid mode compression ignition engine. Materials Today: Proceedings, 45. pp. 5847-5852. ISSN 22147853

Bhaskar, K. and Sassykova, L.R. and Prabhahar, M. and Shebha Percis, E. and Nalini, A. and Jenish, T. and Jayarajan, J. and Sendilvelan, S. (2021) Analysis of Cymbopogon Citratus, Pinus sylvestris and Syzygium cumini biodiesel feedstocks for its fatty acid composition. Materials Today: Proceedings, 45. pp. 5970-5977. ISSN 22147853

Dharmalingam, K.N. and Nalini, A. and Jijina, G.O. and Sheeba Percis, E. and Jenish, T. and Jayarajan, J. and Sendilvelan, S. (2021) Investigation on microgrid control for grid tied PV battery system incorporating sustainable manufacturing technology. Materials Today: Proceedings, 45. pp. 5982-5986. ISSN 22147853

Ganesh, P. and Visagan, A. and Ethiraj, N. and Prabhahar, M. and Sendilvelan, S. (2021) Optimization of pyramid shaped single point incremental forming of AA5052 alloy sheet. Materials Today: Proceedings, 45. pp. 5892-5898. ISSN 22147853

Imthiyas, A. and Saravanan, M. and Sanjaykumar, B M and Sujith Raj, P and Udhaya Kumar, M (2021) Influence of Nozzle Hole Geometry of CI Engines Performance and Emission Parameters Fuelled by Diesel and Biodiesel-A Review. Journal of Physics: Conference Series, 2040 (1). 012046. ISSN 1742-6588

Jijina, G. O. and Mohana Priya, R. and Solainayagi, P. (2021) FPGA Realization of Reconfigurable DA-Based Digital FIR Filter Using DRPPG and MCSA Techniques. Scopus, 179. pp. 527-544. ISSN 2367-3370

Johnson Daniel, R. and Sangeetha, S.P. (2021) Experimental study on concrete using waste ceramic as partial replacement of aggregate. Materials Today: Proceedings, 45. pp. 6603-6608. ISSN 22147853

Joseph, R. Edwin and Kanya, N. and Bhaskar, K. and Xavier, J. Francis and Sendilvelan, S. and Prabhahar, M. and Kanimozhi, N. and Geetha, S. (2021) Analysis on productivity improvement, using lean manufacturing concept. Materials Today: Proceedings, 45. pp. 7176-7182. ISSN 22147853

Kalyanakumar, S. and Chandy, Sam T. and Adil Muhammed, K.T. and Rohith, P.S. (2021) Multi-response optimization of machining parameters of turning operation with green environment in EN24T using grey relational analysis in Taguchi method. Materials Today: Proceedings, 45. pp. 6193-6197. ISSN 22147853

Kalyanakumar, S. and Munikumar, C. and Govind Nair, S. and Shaju, Sam (2021) Application of multi response optimization of drilling setting main process parameter using VIKOR approach. Materials Today: Proceedings, 45. pp. 6099-6102. ISSN 22147853

Kamatchi Hariharan, M. and Anderson, A. and Ravi Kumar, K. and Senthilkumar, A. (2021) Optimization of machining parameters in turning of LM6 high silicon aluminium alloy using aluminium titanium nitride and diamond like carbon coated carbide tool. Materials Today: Proceedings, 45. pp. 5853-5859. ISSN 22147853

Karthikeyan, S. and Nagasudhan, N. and Rogan, A. Nithin and Senthilkumar, A. and Leelaprasad, G. (2021) Transient numerical analysis on the melting characteristics of Paraffin and D-mannitol phase change materials for latent thermal energy storage. Materials Today: Proceedings, 45. pp. 6306-6313. ISSN 22147853

Krishnamoorthi, Sangeetha and Prabhahar, M. and Madhavan, V. and Pragathish, T. and Johnson, F. (2021) Effect of variation in injector nozzle holes on the performance of preheated Spirulina methyl ester used in VCR engine. Materials Today: Proceedings, 45. pp. 5840-5846. ISSN 22147853

Leema Rose, A. and Elango, D. and Vijayan, D.S. and Jebasingh Daniel, J. (2021) Reliability analysis of corroded beams with FRP laminates. Materials Today: Proceedings, 45. pp. 5987-5990. ISSN 22147853

Mahesh, R. and Muthurajan, K.G. and Surendrababu, K. and Senthilkumar, A. (2021) Investigation on performance and emission characteristics of jack fruit peel biodiesel in VCR using single hole nozzle. Materials Today: Proceedings, 45. pp. 6348-6355. ISSN 22147853

Prabhahar, M. and Lakshminarayanan, N. and Muhammed, K.A. and Vishnu, M.K. and Varghese, Vijin (2021) Design of automobile car seat vibration analysis due to road excitation using CATIA. Materials Today: Proceedings, 45. pp. 6287-6291. ISSN 22147853

Priyadarshini, V. and Felixkala, T. and Depaa, R.A.B. and Hemamalinie, A. and Francis Xavier, J. and Surendra Babu, K. and Jeya Arthi, A.J. (2021) Experimental investigation on properties of coir pith and its influence as partial replacement of fine aggregate in concrete. Materials Today: Proceedings, 45. pp. 6903-6906. ISSN 22147853

R, Rathika and Geetha (2021) Endometrial stromal sarcoma- A case report. Indian Journal of Obstetrics and Gynecology Research, 6 (2). pp. 225-227. ISSN 2394-2746

R. Deepa and Shastri, Deepti and K. Suganya (2021) Morphometric Analysis of Acetabulum in South Indian Population. International Journal of Anatomy and Research, 9 (9). pp. 7851-7856. ISSN 23218967

Sadhasivam, S. and Shanmugam, M. and Umamaheswaran, P.D. and Venkattappan, A. and Shanmugam, S. (2021) Zinc Oxide Nanoparticles: Green Synthesis and Biomedical Applications. Journal of Cluster Science, 32 (6). pp. 1441-1455. ISSN 15728862; 10407278

Sahaya Anselin Nisha, A. and Saravanan, M. and Sakthisudhan, K. and Vijendra Babu, D. (2021) Epoxy based textile 3 × 3 grid microstrip slots & breast tumor coverage detection by composites. Materials Today: Proceedings, 45. pp. 6623-6627. ISSN 22147853

Samuel, J. and Pravin, J. and Divahar, R. and Aravind Raj, P.S. and Joanna, P.S. (2021) Performance enhancement of built-up cold-formed steel beams with diagonal rebars in web. Materials Today: Proceedings, 45. pp. 5903-5910. ISSN 22147853

Sangeetha, S P and Bhowmick, Susmita and Md, Nawas Khan and Akash, M (2021) Decolorization of Textile Wastewater with Activated Carbon made of Coconut Shell. Journal of Physics: Conference Series, 2040 (1). 012055. ISSN 1742-6588

Saravanan, M. and Kumar, D. Bubesh (2021) A review on navy ship parts by advanced composite material. Materials Today: Proceedings, 45. pp. 6072-6077. ISSN 22147853

Sathiyaraj, S. and Senthilkumar, A. and Muhammed Ameen, P. and Sundar, Rhitwik and Saseendran, Vishnu (2021) Experimental investigations on mechanical properties of Al-B4C metal matrix composites. Materials Today: Proceedings, 45. pp. 6372-6376. ISSN 22147853

Selva Babu, B. and Sathiyaraj, S. and Ramesh, Anantha Krishnan P. and Afridi, B.A. and Kristo Varghese, K. (2021) Investigation of machining characteristics of aluminium 6061 by wire cut EDM process. Materials Today: Proceedings, 45. pp. 6247-6252. ISSN 22147853

Senthilkumar, A. and Abhijith, E.P. and Jawhar, C. Ahammed Ansar and Jamshid (2021) Experimental investigation of Al2o3/Sio2 hybrid nanolubriant in R600a vapour compression refrigeration system. Materials Today: Proceedings, 45. pp. 5921-5924. ISSN 22147853

Senthilkumar, A. and Mohammed Sahaluddeen, P.A. and Nufais Noushad, Mohammed and Mohammed Musthafa, E.K. (2021) Experimental investigation of ZnO / Sio2 hybrid nano-lubricant in R600a vapour compression refrigeration system. Materials Today: Proceedings, 45. pp. 6087-6093. ISSN 22147853

Shanmugavel, K. and Lakshmana Kumar, S. and Saranya, S.N. and Prabhu, L. (2021) Effect of process parameters of (Cr3C2 + alumina) thermal spray coating on tribological control factors. Materials Today: Proceedings, 45. pp. 6400-6405. ISSN 22147853

Subathra, P. and Sangeetha, S.P. (2021) Study on pellucid concrete incorporating optical fibers–a review. Materials Today: Proceedings, 45. pp. 6682-6686. ISSN 22147853

Thiruchitrambalam, M. and Suresh, A.G. and Shanmugam, D. and Prabhahar, M. (2021) Dynamic mechanical behavior and Fractography of Lyocell fabric - polyester composite. Materials Today: Proceedings, 45. pp. 6094-6098. ISSN 22147853

Vijayakumar, K.R. and Jayaseelan, J. and Ethiraj, N. and Prabhahar, M. and Bhaskar, K. and Jayabalakrishnan, D. and Sendilvelan, S. and Krishnamoorthi, Sangeetha (2021) Investigation on aluminium/mild steel plates bonded polyurethane sheets to control vibration. Materials Today: Proceedings, 45. pp. 5860-5867. ISSN 22147853

Vijayakumar, Vinodh and Sangeetha, S.P. (2021) Urban form as a critical factor in the Quality of Life indicators – A review. Materials Today: Proceedings, 37. pp. 877-879. ISSN 22147853